製品検索結果

The PCI-DMI32 board provides for data I/O via the cable at up to 200 Mbytes per second (LVDS differential I/O) and can transfer data indefinitely without host intervention. The data path is up to 32 bits wide. The board will interface to a wide variety of digital I/O devices and will operate back-to-back with a second board to provide a high-speed PCI-to-PCI Interface. Bi-directional handshake signals can be user defined and programmed by the factory to accommodate almost any handshaking protocol (Contact factory).

Low noise, 24-bit resolution, low phase distortion and multi-board synchronization make the PC104P-24DSI12 board ideal for state-of-the-art sonar and noise monitoring applications. The 4-channel PC104P-24DSI12-4-16SDI analog input board provides high-density 24-bit analog input resources on a standard PC104-Plus module. Optimized for flexibility and performance with minimum power consumption, the board is ideal for a wide variety of applications, ranging from basic voltage measurement to the analysis of complex audio signals and waveforms. Note: All PC/104-Plus boards are available in a PCI-104 form factor. The ISA connector is not installed for the PCI-104 board. Use the prefix PCI104- instead of PC104P to order a board without the ISA connector. PC/104+ boards can also be ordered with non-stackable PCI connectors by adding -NS to the end of the part number.

16 Analog Output Channels 16-Bit Dac per channel 1.0 MSPS Clocking Rate per Channel Dynamic Control of Clocking Rate Open and Circular Buffer Operation 64K-Sample FIFO Buffer 2 Differential Analog Input Channels 16-Bit ADC per channel Simultaneous Sampling 1.0 MSPS Sampling Rate per Channel 64K-Sample FIFO Buffer Software-Selected Analog Ranges: �2.5V, �5V, �10V, 0-5V, 0-10V 8-Bit Bidirectional Digital I/O Port 512 Byte FIFO I/O Buffer Supports Pattern Generation Configurable as Input or Output Port 66 MHz PCI Support

•64 differential 24-Bit simultaneously-sampled analog input channels. Optional 48 and 32-channel versions also available. •Input sample rates from 1KSPS to 200KSPS per channel. •Fixed input range available from 2Vpp (±1V) to 5Vpp (±2.5V). Call for availability of a specific range. •Delta-Sigma input conversion minimizes or eliminates the need for antialias filtering. •Precision DC characteristics as well as wide dynamic range AC performance. •256K-sample analog input FIFO buffer. •Typical dynamic range of 102dB; 120dB with 10kHz software postfilter. •Continuous and Burst (one-shot) sampling modes. •Sample clock source selected as internal or external. •Supports multiboard synchronization of analog inputs. •On-demand internal offset and gain autocalibration of all analog inputs. •4-Bit bi-directional digital TTL port. •High-density Front-Panel system I/O connections. •PCI Express control interface, single-lane. •Available in PMC or XMC form factors with reduced channel-count.

・64 differential 24-Bit simultaneously-sampled analog input channels. Optional 48 and 32-channel versions also available. ・Input sample rates from 1KSPS to 200KSPS per channel. ・Fixed input range available from 2Vpp (±1V) to 5Vpp (±2.5V). Call for availability of a specific range. ・Delta-Sigma input conversion minimizes or eliminates the need for antialias filtering. ・Precision DC characteristics as well as wide dynamic range AC performance. 256K-sample analog input FIFO buffer. ・Typical dynamic range of 102dB; 120dB with 10kHz software postfilter. ・Continuous and Burst (one-shot) sampling modes. ・Sample clock source selected as internal or external. ・Supports multiboard synchronization of analog inputs. ・On-demand internal offset and gain autocalibration of all analog inputs. 4-Bit bi-directional digital TTL port. ・High-density Front-Panel system I/O connections. ・PCI Express control interface, single-lane. ・Available in PMC or XMC form factors with reduced channel-count.

Low noise, 24-bit resolution, low phase distortion and multi-board synchronization make the PCI-24DSI32 board ideal for state-of-the-art sonar and noise monitoring applications. The 32-channel PCI-24DSI32 analog input board provides a high-density 24-bit analog input resources on a standard PCI expansion board. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. Each of the 32 delta-sigma analog input channels can be can be harmonically locked together. A/D conversions on multiple boards can be synchronized and phase-locked. Input bandwidth is from DC to 80kHz. Sample rates are adjustable from 2KSPS to 200KSPS, and the input range is software selectable as ±2.5V, ±5V or ±10V. Internal autocalibration networks permit periodic calibration to be performed without removing the board from the system.

Analog Inputs: Four Differential Sigma-Delta Analog Inputs with Dedicated 16-Bit ADC per Channel Simultaneous Sigma-Delta Sampling of all Inputs to 1.0 MSPS per channel Sigma-Delta A/D Architecture; Minimal or no antialiasing requirements Analog Outputs: 4 Single-Ended Analog Outputs with Dedicated 16-Bit DAC per Channel Simultaneous Output Clocking Rates from 30 KSPS to to 1.0 MSPS per Channel Selectable Direct-Write or FIFO-Buffered Access Buffer Configurable as Open for Data Streaming, or Circular for Periodic Functions

Low noise, 24-bit resolution, low phase distortion and multi-board synchronization make the PMC-24DSI12 board ideal for state-of-the-art sonar and noise monitoring applications. The 12-channel PMC-24DSI12 analog input board provides a high-density 24-bit analog input resources on a standard PCI expansion board. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. Each of the 12 delta-sigma analog input channels can be controlled by any one of two independent sample clocks, and multiple channels can be harmonically locked together. A/D conversions on multiple boards can be synchronized and phase-locked. Input bandwidth is from DC to 80kHz. Sample rates are adjustable from 2KSPS to 200KSPS, and the input range is software selectable as ±2.5V, ±5V or ±10V. Internal autocalibration networks permit periodic calibration to be performed without removing the board from the system.

Any PMC board can be used on PCI Express, PCI-X, cPCI-X, PCI, cPCI, PC/104-Plus via an adapter. 16 wide-range differential 24-Bit simultaneously-sampled analog input channels. Input sample rates to 105 Kilosamples per second per channel. Software-selectable analog input ranges of +⁄10mV, +⁄100mV, +⁄1V, +⁄10V. Delta-Sigma input conversion minimizes or eliminates the need for antialias filtering. 256K-sample analog input and output FIFO buffers. Continuous and burst (one-shot) sampling modes. Sample clock source selected as internal or external. Supports multiboard synchronization of analog inputs. On-demand internal offset and gain autocalibration of all analog inputs. 4-Bit bi-directional digital port. 66MHz PCI support, with universal 5V/3.3V signaling and DMA support. Large FPGA supports optional features such as counter/timers. Available on adapters for alternate form factors, including PCI, cPCI and PC104-Plus, as well as PCI-Express, PCIX and cPCIX

8 Differential 24-Bit Analog Input Channels Delta-Sigma Converter per Channel, with Linear Phase Digital Antialias Filtering Sample rates from 2 KSPS to 200 KSPS per Channel Software-Selectable Input Ranges: ±2.5V, ±5V, ±10V 256 K-sample FIFO Buffer Synchronous or Independent ADC Clocking Internal Sample Rate Generators Hardware Sync and Clock I/O for Multiboard Synchronization Supports GPS Synchronization to a 1PPS Input Low Phase Skew; Typically Less than 55ns with Fsig < 0.35*Fsamｐ DMA Engine Supports both Block-Mode and Demand-Mode Transfers Low Power Consumption. 6 Watts Typical. Only +5VDC Required from PCI bus. 100dB Dynamic Range to 100KSPS; 93 dB SINAD On-demand Autocalibration Ensures DC Precision as well as AC performance Integrated DC/DC Conversion and Regulation of Precision Internal Supply Voltages Conforms to PCl Bus Specification, Revision 2.3, with Universal Signaling Triggered Acquisition feature supports external acquisition triggering