条件に該当する製品200件
-
VPX/VME64x Hybrid, Type 39 E-Frame, Test Platform
ELMA TOOL/開発環境 VPX その他- 39E08ADXC8Y3VG3X（型式）
- Modular, open frame, test and development platform
- Versions supporting 3U or 6U cards
- Full width versions (84T)
- Holds 6U x 160mm cards from front
- RTM mounting (rear transition module)
- Architectures PICMG: 2.0, 2.16, 2.17, EXP.0 backplanes
- (H.110 optional)
- Rear AC power input module with GND stud
- System monitoring with RS232 interface (optional)
- High performance cooling via front and rear mount fan trays
- Speed controlled fans with fan fail indication
- Durable, black powder coat finish
- Top handle for easy portability
- Front accessible test points and monitoring LEDs for: 3.3V,+-
- 5V, +-12V, +- 24V & +-48V
- Fixed and plug mount PSU options: 90-230VAC, 24VDC,
- 48VDC
-
6U 10-Slot OpenVPX Backplane BKP6-CEN10-11.2.6-n
ELMA バックプレーン OpenVPX 防衛The Elma BKP6-CEN10-11.2.6-3 6U OpenVPX backplane comes in a
Dual Star centralized routing topology with two switch slots and four
Fat Pipes to each slot. The control plane is also a Dual Star topoloy
with two Ultra Thin pipes to each slot. The expansion plane connects
adjacent slots with double Fat Pipes in a daisy chain topology. The
data plane has Fat Pipes available and the control plane has Thin
Pipes that can be assessed from an RTM or via cables.
The backplane offers 3.125 to 6.250 Gbauds/ performance in one
PCB. This design provides maximum performance while saving you
money.
Features
ELMA
• Compliant to ANSI/VITA 65-2012 and ANSI/VITA 46.0-2013
Backplanes
• 1.0” slot pitch
• Dual Star routing topology
• High-speed Velox connectors
• Rugged Eurocard form factor in 6U height
• Provides built in ESD ground protection in every slo -
2-Slot, 6U/3U VPX Development SystemType 39 E-Frame
ELMA バックプレーン OpenVPX 試験 環境Features
- 2-slot test & development platform for 3U and 6U VPX and OpenVPX™ boards
- Each slot can be configured independently for power requirements
- 1.6” slot pitch accommodates wider modules compatible with VITA 48.5 (air
flow-through), and provides easy access to components on either side of boards - More than two modules may be interconnected with additional 2-slot backlanes
- Enables use of standard VPX RTM modules and access to J1 high speed signals
- Chassis power input: 90-264 VAC autoranging, total power 700 watts
- High performance cooling fans
- Aluminum construction with scratch-resistant black painted finish
- Built-in Voltage Monitor with green LEDs for bus voltages compliance
- Top handle for ease of portability, desktop feet on bottom
-
Power Interface Board (PIBs)6U, OpenVPX™ Backplanes
ELMA バックプレーン VITA62 防衛 -
3U 6-Slot OpenVPX BackplaneBKP3-CEN06-15.2.2X-3
ELMA バックプレーン OpenVPX 防衛Description
Designed to meet VITA 65, the 6-slot OpenVPX features a data plane
with 1 Fat Pipe on each slot routed to the switch slot in slot 6. The conrol
plane features an Ultra Thin Pipe on each slot routed to the switch slot.
This backplane does not have an expansion plane.
Features
• Compliant to the VITA 65 Standard.
• Uses the rugged 3U-160 Eurocard form factor
• High-speed EPT Velox connector
• Provides built in ESD ground protection in every slot -
VPX Power and GroundBACKPLANES
ELMA バックプレーン VPX 防衛DESCRIPTION
Elma’s VPX power and ground development backplanes
are simple and cost-effective development tools to develop
a VPX based system. All of the pins are user-defined.
Power for 3.3V, 5V and 12V are included. The rear
connectors are all fully loaded. For use with Elma’s slot to
slot or slot to I/O bulkhead cable products during system
development.
Features
■
■ Compliant to the latest VITA 46 / 65 specifications
■
■ Power and ground only backplane for simple and low
cost development
■
■ 3.3V, 5V, and 12V power
■
■ P0-P6 pins are user-defined
■
■ NVMRO, SYSRESET#, SYSCON# and maskable reset
are supported -
VME/VME64x Load BoardsVITA Backplanes
ELMA バックプレーン VMEbus 試験 環境Description
The Elma Bustronic VME/VME64x load board enhance provides a means to test the
power generated and cooling capability of VME systems.
The 6U VME/VME64x load board saves significant time and expense by confirming
a system’s operating specifications. The load board functions to test a system’s
cooling capabilities by applying a load to the power supply for verification, then
generating necessary heat to confirm the chassis’ cooling. This enables locating hot
spots in the chassis so the airflow can be properly directed.
Features- Conforms to electrical and mechanical connections of ANSI/VITA 1, 1994 for
VME and ANSI/VITA 1.1, 1997 for VME64 extensions
ELMA
• Verifies chassis can meet power requirement and specifications for VME/VME64x - Aids in locating hot spots in the chassis
Backplanes
• Go/No Go LED indicators for +5V, +3.3V, +12V, -12V (within ± 5%) - Primary test points +V1, +V2, -V1, -V2, ACFAIL, SYSRESET,
SYSFAIL, and GROUND - Power supply loading varies with front panel switches from 0 to 7 amps for
thermal characterization
- Conforms to electrical and mechanical connections of ANSI/VITA 1, 1994 for
-
2-Slot, 6U/3U VPX Development SystemType 39 E-Frame
ELMA 筐体 VPXFeatures • 2-slot test & development platform for 3U and 6U VPX and OpenVPX™ boards • Each slot can be configured independently for power requirements • 1.6” slot pitch accommodates wider modules compatible with VITA 48.5 (air flow-through), and provides easy access to components on either side of boards • More than two modules may be interconnected with additional 2-slot backlanes • Enables use of standard VPX RTM modules and access to J1 high speed signals • Chassis power input: 90-264 VAC autoranging, total power 700 watts • High performance cooling fans • Aluminum construction with scratch-resistant black painted finish • Built-in Voltage Monitor with green LEDs for bus voltages compliance • Top handle for ease of portability, desktop feet on bottom
-
2-Slot, 6U/3U VPX Development System Type 39 E-Frame
ELMA 筐体 VPX 防衛特長
- 3Uおよび6U VPXおよびOpenVPX™ボード用の2スロット・テスト＆開発プラットフォーム
- 各スロットは電源要件に合わせて個別に構成可能
- 1.6インチのスロットピッチは、VITA 48.5（エアフロースルー）互換の幅広モジュールに対応し、ボードの両側のコンポーネントに容易にアクセスできます
- 追加の2スロット・バックレーンを使用することで、2つ以上のモジュールを相互接続できます
- 標準VPX RTMモジュールの使用とJ1高速信号へのアクセスが可能
- シャーシ電源入力：90～264VACオートレンジ、合計電力700W
- 高性能冷却ファン
- 傷に強い黒色塗装仕上げのアルミニウム製筐体
- バス電圧コンプライアンス用の緑色LEDを備えた電圧モニターを内蔵
- 持ち運びに便利な上部ハンドル、底面にはデスクトップ脚を装備
-
VPX/VME混在システムユニット
株式会社エスアールシー 筐体 VPX 防衛・ANSI/VITA 46.0&46.1VMEバス規格準拠 ・VPX：5スロット/VME64：3スロット対応の6Uバックボード搭載 ・高速対応マルチギガコネクタを採用 ・リアI/O対応（RJ3～RJ6にコネクタ搭載） ・バックボードはハロゲンフリー基板を採用 ・電源はAC100～264V、50/60Hzまで使用可能 ・FANアラーム用ランプ＆ブザー機能搭載 ・外形寸法は、EIA規格(7U)サイズ ・RoHS指令対応
