条件に該当する製品659件
-
VT018
VadaTech Shelf Manager/MCH AdvancedTCA 通信・ キャリア・Form, fit and functionally compatible to the Intel� MPCMM0002 Module ・5W max power ・Linux release 2.6.21 ・Field upgradable with dual boot flash ・IPMI 2.0 compliant ・Telco alarms ・Isolated DC/DC converter ・Active/standby redundancy when utilizing two VT018s in system ・32-bit RISC processor @ 400MHz ・64 MB of DDR @ 266Mhz ・32Kbyte FRAM for log messages ・Quad 10/100 Ethernet ports ・RS-232 Debug port
-
VT014
VadaTech Shelf Manager/MCH AdvancedTCA 通信・ キャリア・32-bit RISC processor @ 400 MHz ・64 Mbytes of DDR @ 266 MHz ・128 Mbytes of flash ・32KByte FRAM for log messages ・Three 10/100 Ethernet ports ・RS-232 Debug port ・Linux release 2.6 ・Field upgradable with dual boot flash ・IPMI 2.0 compliant ・Telco alarms via VT092 ・Isolated DC/DC converter ・Active/standby redundancy when utilizing two VT014s in the system ・Rich set of management software (refer to the VT001 specification for all software components) such as HPI, RMCP, SNMP, CLI, HTTP, etc. ・VT014 can run as an IPMI protocol analyzer to monitor the I2C busses
-
VT026
VadaTech IPMI その他 試験 環境・Complete AMC.0 IPMI compliant reference design with software ・32-bit RISC processor ・Integrated 512K Flash, WDT, A/D, Dual I2C, Dual SPI, etc. ・Payload communication via any of the interfaces (I2C, RS232 or SPI) ・No upfront costs ・No Royalties ・GCC tool chain
-
VT019
VadaTech Shelf Manager/MCH AdvancedTCA 通信・ キャリア・For ELMA ATCA bused or radial chassis ・5W max power ・Field upgradable with dual boot flash ・IPMI 2.0 compliant ・Telco alarms ・Isolated DC/DC converter ・Active/standby redundancy when utilizing two VT019s in system ・Rich set of Management software (refer to the VT002 specification for all software components) such as HPI, RMCP, SNMP, CLI, HTTP, etc. ・VT019 can run as an IPMI protocol analyzer to monitor all the 40+ I2C busses ・32-bit RISC processor @ 400MHz ・64 MB of DDR @ 266Mhz ・32Kbyte FRAM for log messages ・Quad 10/100 Ethernet ports ・RS-232 Debug port ・Linux release 2.6.21
-
VT028
VadaTech IPMI AdvancedTCA 試験 環境・Complete ATCA 3.x IPMI compliant reference design with software ・32-bit RISC processor ・No AMC moulde is suported in this desing (if AMC is needed, use the VT027) ・Integrated 512K flash, WDT, A/D, dual I2C, dual SPI, etc. ・64-pin HVQFN package ・Payload communication via any of the interfaces (I2C, RS232 or SPI) ・No up-front costs ・No royalties ・GCC tool chain
-
VT027
VadaTech IPMI AdvancedTCA 試験 環境・Complete ATCA 3.x IPMI compliant reference design with software ・Manages up to eight AMC slots on the ATCA ・32-bit RISC processor ・Integrated 512K Flash, WDT, A/D, Dual I2C, Dual SPI, etc. in 64 pin HVQFN package ・Payload communication via any of the interfaces (I2C, RS232 or SPI) ・No upfront costs ・No Royalties ・GCC tool chain
-
VT096
VadaTech IPMI AdvancedMC 通信・ キャリア・Cooling Unit (CU) controller for μTCA ・Dual IPMI bus for redundancy ・Five PWM signals ・Ten TACH inputs ・Three inputs for IPMI hardware address ・+12V input ・Blue, Red, Amber and Green LEDs ・32-bit RISC processor ・Two banks of 256K flash for redundancy ・Firmware is field upgradable ・Three additional I2C busses ・Manages up to five zones
-
VT072
VadaTech バックプレーン AdvancedMC 試験 環境・Single slot AMC backplane ・Provides +12V and Management Power to the AMC Module ・Port 0 and 1 are routed to the GbE PHY ・Three M3 Mounting holes to mate to any frame size ・RoHS compliant
-
VT098
VadaTech IPMI マザーボード 3.5インチボード 通信・ キャリア・Dual IPMI bus for redundancy ・Manages up to six Fan ・Firmware is field upgradable ・IPMI 2.0 compliant ・External as well as internal WDT ・Available in Industrial Temp ・Three PWM signals ・Six TACH inputs ・Eight inputs for IPMI hardware address ・+12V input ・Blue, Red, Amber and Green LEDs ・32-bit RISC processor ・Two banks of 256K Flash for redundancy
-
VT097
VadaTech IPMI AdvancedMC 通信・ キャリア・Cooling Unit (CU) controller per μTCA ・Dual IPMI bus for redundancy ・Manages up to five zones ・Five PWM signals ・Five TACH inputs ・Three inputs for IPMI hardware address ・+12V input ・Blue, Red, Amber and Green LEDs ・32-bit RISC processor ・Two banks of 256K Flash for redundancy ・Firmware is field upgradable ・IPMI 2.0 compliant ・External as well as internal WDT ・Available in Industrial Temp ・Three additional I2C busses
