製品検索結果

Advanced Profibus PMC Controller for FieldbusI Applications ・Highly integrated EC-1 ASIC with ASPC-2 technology ・Profibus DP V1 master (class 1/2) ・Up to 12 MBaud transfer rate ・Optoisolated RS485 PROFIBUS interface ・Easy to use software interface, OPC server and system configurator ・From the leading manufacturer of fieldbus modules Hilscher GmbH

・NVIDIA G73 GPU (as used on NVIDIA® GeForce® 7600GT ・Leading OpenGL performance ・128/256 MBytes GDDR3 SDRAM ・Two independent output channels (Dual Head) ・VESA output resolutions to 2560x1600 using Dual link DVI ・RS-170, NTSC & PAL video output ・DVI 1.0 digital video output ・Air- and rugged-conduction variants ・XMC form factor, with either XMC or PMC I/O ・3D mark 06 score » 3200

・Convection or conduction-cooled ・32-bit 33 MHz local bus ・PCI 6154 transparent bridge ・VMEBus card designed for VME64 chassis ・PCI-over P0 data transfer ・Dual IEEE 1386.1 PMC sites

・Four independent MIL-STD-1553 interfaces ・Support for 1553A, 1553B Notice 2 ・Both transformer-coupled and direct-coupled signals provided ・BC, RT, MT modes independently selectable for each channel ・10 bits of TTL-compatible discrete digital I/O ・VxWorks, Linux and Windows 2000 driver available directly from AIT (Avionics Interface Technologies) ・PCI 2.1-compliant 64-bit, 66 MHz interface ・Needs only 5V from the basecard, no other voltages required ・Available in ruggedization levels, level 0 and 200 conduction-cooled ・Product Support provided by AIT (Avionics Interface Technologies)

Analog Inputs: Four Differential Sigma-Delta Analog Inputs with Dedicated 16-Bit ADC per Channel Simultaneous Sigma-Delta Sampling of all Inputs to 1.0 MSPS per channel Sigma-Delta A/D Architecture; Minimal or no antialiasing requirements Analog Outputs: 4 Single-Ended Analog Outputs with Dedicated 16-Bit DAC per Channel Simultaneous Output Clocking Rates from 30 KSPS to to 1.0 MSPS per Channel Selectable Direct-Write or FIFO-Buffered Access Buffer Configurable as Open for Data Streaming, or Circular for Periodic Functions

Low noise, 24-bit resolution, low phase distortion and multi-board synchronization make the PMC-24DSI12 board ideal for state-of-the-art sonar and noise monitoring applications. The 12-channel PMC-24DSI12 analog input board provides a high-density 24-bit analog input resources on a standard PCI expansion board. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. Each of the 12 delta-sigma analog input channels can be controlled by any one of two independent sample clocks, and multiple channels can be harmonically locked together. A/D conversions on multiple boards can be synchronized and phase-locked. Input bandwidth is from DC to 80kHz. Sample rates are adjustable from 2KSPS to 200KSPS, and the input range is software selectable as ±2.5V, ±5V or ±10V. Internal autocalibration networks permit periodic calibration to be performed without removing the board from the system.

8 Differential 24-Bit Analog Input Channels Delta-Sigma Converter per Channel, with Linear Phase Digital Antialias Filtering Sample rates from 2 KSPS to 200 KSPS per Channel Software-Selectable Input Ranges: ±2.5V, ±5V, ±10V 256 K-sample FIFO Buffer Synchronous or Independent ADC Clocking Internal Sample Rate Generators Hardware Sync and Clock I/O for Multiboard Synchronization Supports GPS Synchronization to a 1PPS Input Low Phase Skew; Typically Less than 55ns with Fsig < 0.35*Fsamｐ DMA Engine Supports both Block-Mode and Demand-Mode Transfers Low Power Consumption. 6 Watts Typical. Only +5VDC Required from PCI bus. 100dB Dynamic Range to 100KSPS; 93 dB SINAD On-demand Autocalibration Ensures DC Precision as well as AC performance Integrated DC/DC Conversion and Regulation of Precision Internal Supply Voltages Conforms to PCl Bus Specification, Revision 2.3, with Universal Signaling Triggered Acquisition feature supports external acquisition triggering

6 Multirange differential 24-Bit simultaneously-sampled analog input channels. Input sample rates from 10 to 500 Kilosamples per second per channel, software-selectable; including 327.680 KSPS. Fixed ±6V input range. Contact factory for availability of optional input ranges of ±10V, ±5V or ±2.5V. Delta-Sigma input conversion minimizes or eliminates the need for antialias filtering. 256K-sample analog input FIFO buffer. Continuous and Burst (One-shot) sampling modes. Sample clock source selected as internal or external. Supports multiboard synchronization of analog inputs. On-demand internal offset and gain autocalibration of all analog inputs. Software-controlled Front-Panel LED indicator. 8-Bit bi-directional digital TTL port. Front-Panel system I/O connections. 66MHz 32-bit PCI support where applicable, with universal 5V/3.3V signaling and DMA support.

The high-density 12AI64 board provides cost effective 1,500,000 conversions-per-second 12-bit analog input capability in a single width PMC format. The inputs are configurable either as 64 single-ended channels or as 32 differential channels,and the input range can be software selectable as 10V, 5V or 2.5V. Scan rates can be controlled from either (a) an internal rate generator, (b) through an external digital input, or (c) by direct software commands. Multiple 12AI64 boards can be connected together for synchronous scanning. Data buffering is accomplished through a 64K sample FIFO. Internal auto calibration networks permit calibration to be performed without removing the board from the system.

The high-density PMC-16AI64 board provides a cost effective 500,000 conversions-per-second 16-bit analog input capability in a single-width PMC format. The inputs are configurable either as 64 single-ended channels or as 32 differential channels, and the input range can be software selectable as ±10V, ±5V or ±2.5V. Scan rates can be controlled from either (a) an internal rate generator, (b) through an external digital input, or (c) by direct software commands. Multiple PMC-16AI64 boards can be connected together for synchronous scanning. A 64K-sample FIFO provides maximum buffering of input data. Internal auto calibration networks permit calibration to be performed without removing the board from the system. Available in PMC, PCI, cPCI and PC104-Plus and PCI Express form factors as: PMC-16AI64: PMC, Single-width PCI-16AI64: PCI, short length cPCI-16AI64: cPCI, 3U PC104P-16AI64: PC104-Plus PCIe-16AI64: PCI Express PCIe104-16AI64: PCIe, one-lane on PC/104 form factor