条件に該当する製品121件
-
PCIe-20AOF4C500K(20-Bit 4-Output 500KSPS Precision Wideband PCI Express Short-card Analog Output Board )
GneralStandardsCorporation D/A PCI Express 物理 天体 Four 20-Bit analog output channels. Software-selectable output configuration: 2-Wire Single-ended or 3-Wire Differential. Simultaneous Clocking; Individual 20-Bit R-2R DAC per output channel. Clocking rates from zero to 500KSPS. Software-selectable fullscale output ranges: ±10V and ±5V. 8th-Order reconstruction filter in each output channel. Optional Outputs Disconnect feature ensures quiet outputs during autocalibration and selftest operations. Software control. Adds 1-Ohm to R-out. Remote ground sensing to minimize single-ended errors. On-demand autocalibration of all channels. 256K-sample output FIFO buffer. Internal sample rate generator with 24-Bit rate divider. Hardware trigger and clock I/O for multiboard synchronization. Eight Bidirectional digital TTL I/O lines. Conforms to PCI Express Specification revision 1.0a, single-lane. Standard PCI Express Short-card form factor. DMA Engine supports block-mode and demand-mode transfers in two DMA channels.
-
XMC-18AISS6C12M(18-Bit, 6-Channel, 12 MSPS XMC Analog Input Board With 2-Megasample Data FIFO and SAR Converters)
GneralStandardsCorporation A/D PMC/XMC 防衛Six Differential Analog Inputs with dedicated 18-Bit ADC per channel True Simultaneous Sampling of all inputs from Zero to 12MSPS per channel 2.0 Megasample input data FIFO buffer SAR Architecture; No minimum sample rate; Minimum Latency Selectable Input Ranges: (Order Wideband or High-Level) Wideband: ±2.5V, ±1.25V, ±0.625V ; or High-Level: ±10V, ±5V, ±2.5V Miniature MMCX coaxial system connectors for analog inputs and timing I/O. Hardware Clock and Sync I/O for multiboard operation Timing Controlled by internal rate generators, by software clocking, or externally DMA Engine minimizes bus congestion Dual Power Conversion for optimum internal power voltage integrity Internal on-demand Autocalibration of all channels PCI Express control interface XMC form factor Extended-temperature version available
-
PCIe-16AOF64 (16-Bit, 64/32-Channel, 500KSPS PCI Express Analog Output Board)
GneralStandardsCorporation D/A PCI Express 物理 天体 Precision 16-Bit simultaneously-clocked analog outputs: R-2R DAC per channel Available with either 64 single-ended outputs, or 32 balanced-differential outputs Software-selectable ranges of ±10V, ±5V. Optionally 0 to +10V, or 0 to +5V. Output clocking rates from zero to 500K samples per second per channel. Reconstruction filter in each output channel: 6th order Lowpass, 300Hz-100kHz. Optional Outputs-Disconnect feature supports multiple-board redundancy, and eliminates outputs activity during autocalibration Remote ground-sense input minimizes the effects of interground potentials Supports both Block-mode and Demand-mode DMA transactions 256K-Sample output data FIFO buffer; Configurable as open or closed (circular) Simultaneous output clocking, with emulated sequential outputs also supported Multiboard synchronization supported Continuous and Triggered-Burst output modes support seamless waveform sequencing Data clocking rate controlled internally or externally High accuracy ensured by on-demand Autocalibration of all channels x1 Link PCI Express Port operating at 2.5Gbps Available on multiple form factors, including PCI, and cPCI, as well as PC104-Plus, PMC, PCIX and cPCIX with reduced channel count. Contact Sales for availability
-
12AISS44AO4(12-Channel, 12-Bit PMC Analog Input/Output Board With Eight Simultaneously-Sampled Wide-Range Inputs at 2.0 MSPS per Channel, Four Analog Outputs, and 16-Bit Digital I/O Port)
GneralStandardsCorporation A/D PMC/XMC 防衛8 Differential Analog Inputs with Dedicated 12-Bit, 2.0 MSPS ADC per Channel True Simultaneous Sampling of all Inputs; Minimum Data Skew Sampling Rates to 2.0 MSPS per Channel (16 MSPS Aggregate Rate) Input Ranges: ±1V, ±100mV; Factory Configured. Custom ranges to ±10V. 64-Ksample Analog Input FIFO Data Buffer Supports DMA Transfers in Two Channels in Block-Mode or Demand-Mode 4 Analog Output Channels with Direct Register Access 16-Bit Bidirectional Digital I/O Port Sampling Controlled by Internal Rate Generator, by Software Trigger, or Externally On-Demand Internal Autocalibration Hardware Sync I/O for Multiboard Operation Integral Dual-Conversion Precision Analog Power Supplies Completely Software-Configurable; No Field Jumpers Conforms to PCI Local Bus Specification, Revision 2.3, with Universal Signaling
-
12AIO(12-bit Analog I/O, 32-Input/4-Output Channels,16 Digital I/O Port and 1.5M-Conversions/sec)
GneralStandardsCorporation A/D PMC/XMC 物理 天体The 12AIO provides a cost effective high-speed 12-bit analog input/output and digital I/O board. Four analog output channels (at 300,000 samples/ sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts. Inputs and outputs have a common software selected range of ±10V, ±5V or ±2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels.
-
16AISS16AO2(16-Bit, 18-Channel, 1.0-MSPS PMC Analog Input/Output Board With 16 Simultaneously Sampled Analog Inputs, Two Analog Outputs, and Input Sampling Rates to 1.0 MSPS per channel)
GneralStandardsCorporation アナログI/O PMC/XMC 試験 環境The 16-Bit PMC66-16AISS16AO2 analog I/O module samples and digitizes 16 input channels simultaneously at rates up to 1.0 million samples per second per channel, and the resulting 16-bit sampled data is available to the PCI bus through a 256K-Sample FIFO buffer. Sampling can be controlled in groups of 1 through 16 channels, and the sample clock can be generated either from an internal rate generator, or by software or an external source. Both burst and continuous sampling modes are supported, and input ranges are software-selectable as ±10V, ±5V or ±2.5V. The inputs are divided into two channel groups, with an independent software-controlled range assignable to each group. Two analog output channels provide software-selected output ranges of ±2.5V, ±5V or ±10V that are independent of the input range assignments. The outputs are accessed either directly through two dedicated control registers, or through a 256K-Sample FIFO buffer for waveform generation. Four bidirectional digital I/O lines are programmable as inputs or outputs. On-demand autocalibration determines and applies offset and gain correction values for all input and output channels. A selftest input switching network routes output channels or calibration reference signals to the analog inputs, and permits board integrity to be verified by the host.
-
16AISS8AO4(12-Channel, 16-Bit PMC Analog Input/Output Board With Eight Simultaneously Sampled Analog Inputs, Four Analog Outputs, and Input Sampling Rates to 2.0 MSPS per channel)
GneralStandardsCorporation アナログI/O PMC/XMC 防衛Analog Inputs: 8 Differential Analog Inputs with Dedicated 16-Bit ADC per Channel True Simultaneous Sampling of all Inputs to 2.0 MSPS per channel Analog Outputs: 4 Single-Ended Analog Outputs with Dedicated 16-Bit DAC per Channel Simultaneous Output Clocking Rates to 1.0 MSPS per Channel Common Analog I/O Features: Selectable Input/Output Ranges: ±10V, ±5V, ±2.5V Independent 256-K sample Input and Output FIFO Data Buffers Hardware Clock and Sync I/O for Multiboard Operation Internal Power Conversion; Single 5-Volt Power Requirement DMA Engine Minimizes Bus Congestion Timing Controlled by Internal Rate Generator, by Software Clocking, or Externally Internal Autocalibration 16-Bit Bidirectional TTL Digital I/O Port 66 MHz 32-Bit PCI Support, with Universal Signaling
-
16AIO168( 16-bit Analog I/O, 16 single ended or 8 differential Input Channels, 32-K sample FIFO buffers)
GneralStandardsCorporation A/D PMC/XMC 物理 天体The PMC-16AIO168 provides a cost effective, high-speed 16-bit analog input/ output and digital output board. Eight analog output channels (at 300,000 samples/ sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 16 single-ended or 8 differential input channels, and can be scanned continuously or in bursts. Four digital outputs are also offered (output only). Inputs and outputs have a common software selected range of ±10V, ±5V or ±2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels.
-
16AIO(16-bit Analog I/O, 32-Input/4-Output Channels, 16 bit Digital I/O Port and 300k-Conversions/sec)
GneralStandardsCorporation D/A PMC/XMC 防衛The 16AIO provides a cost effective high-speed 16-bit analog input/ output and digital I/O board. Four analog output channels (at 300,000 samples/sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts. Inputs and outputs have a common software selected range of ±10V, ±5V or ±2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels.
-
16CLI8CLO4(16-Bit Analog Input/Output Board with 8 Current Loop inputs, 4 Current Loop Outputs, and 16-Bit Digital I/O Port)
GneralStandardsCorporation アナログI/O PMC/XMC 物理 天体Eight 16-Bit 0-20mA or 4-20mA scanned analog input channels, Software-configurable also as unipolar voltage inputs; 16 single-ended or eight differential, scaled as 0 to +10V, 0 to-+5V or 0 to +2.5V. Four 16-Bit current-loop output channels, configurable as 0-20mA or 4-20mA ranges, driven by four voltage-output DACs scaled as 0 to +10V, 0 to +5V or 0 to +2.5V. Both the current-loop outputs and the outputs of the voltage-DACs are available at the system I/O connector. Current-loop outputs have -15V to +11V compliance using internal supplies, or Zero to +31V compliance using an external +34V loop supply Independent 32K-sample analog input and output FIFO buffers 300K samples per second aggregate analog input sample rate ( 37 KSPS per channel for 8 active channels) 300K samples per second per channel analog output clocking rate (1200 KSPS aggregate rate) Multiple-channel and single-channel input scanning modes Buffer amplifiers on all analog input lines Supports waveform and arbitrary function generation, with continuous and one-shot modes 16-Bit bi-directional TTL digital port Internal rate generator controls input sampling, output sampling, or both simultaneously Supports multiboard synchronization of analog inputs and outputs Internal autocalibration of analog input and output channels Continuous and triggered-burst (one-shot) input and output Modes DMA engine minimizes host I/O overhead 68-Pin SCSI system I/O connector with metal shell 66MHz PCI support where applicable, with universal 5V/3.3V signaling