製品検索結果

Tilera™ GX72CPU with 72 Tile-Gx Core processors Double module, mid-size per AMC.0 Four banks of DDR3 w/ ECC (up to 64 GB) AMC Ports 4-11 are routed to Tilera per AMC.2 (PCIe and XAUI options)

Dual Virtex UltraScale+ VU13P provides massive DSP power using over 24,000 FPGA DSP slices to deliver up to 12TMACs per second/per board •Backplane connections support full mesh fabric at 100G •Network synchronization distributes reference and radio frame clocks across multiple ATC500 boards •Built-in TX and RX reference for antenna port phase alignment and calibration to support massive MIMO

Intel Xeon D 8-Core D-1539 (410 GFLOPS @ 1.6 GHz) or 12-Core D-1559 (576 @ 1.5 GHz) Extended operating temperature Intel eTEMP SKUs PCH integrated in Xeon D SoC Native dual KR 10 Gigabit Ethernet ports 16 to 32 GB DDR4 @ 2133 megatransfers per second with ECC (34 GB/s aggregate) SSD – SATA Gen2, NAND Flash, 16 or 32 GB XMC PCIe up to Gen3, designed for up to 25W thermal dissipation PCIe Gen3 on 3U OpenVPX data plane with switch Core Function FPGA with IPMI 8-lane PCI Express® (PCIe) Gen3 interface to data plane Serial ATA (SATA) controllers – up to 3 ports USB EHCI host controllers – up to 3 ports, USB 2.0/USB 3.0 Conduction and air-cooled Trusted Computing features, including TrustedCOTS protections and support for Wind River Titanium Security Suite OS support: CentOS Linux®, Red Hat® Enterprise Linux, Wind River VxWorks 7.0, and others. Contact Curtiss-Wright for more information. Communications support via MPI/OFED OpenHPEC Accelerator Suite with Dolphin SuperSocket over PCIe Software Wind River Titanium Security Suite Supports General Dynamics SignalEye AI Software for automated RF signal classification

Single or dual NXP Power Architecture 7447A/7448 (AltiVec Technology-enhanced) CPUs, each with: 64 KB L1 cache 512 KB/1 MB internal L2 cache ECC option on 7448 internal L2 cache Altivec-enabled e600 core (previously referred to as G4 core) 9.6 GFLOPS peak processing power at 1.2 GHz core frequency (2) 64-bit PMCs on independent PCI buses (1) 100 MHz PCI-X, one 66 MHz PCI-X Optimized cooling of conduction-cooled PMCs Controlled impedance routing of Pn4 I/O for digital video, StarFabric, Fibre Channel and other high-speed interfaces Memory: High-performance Discovery III system controller - dedicated CPU-to-SDRAM path reduces memory read latency Up to 2 GB of DDR SDRAM with ECC Up to 512 MB of contiguous direct-mapped Flash 128 KB AutoStore nvSRAM with hardware write protection I/O: (3) Gigabit Ethernet interfaces (1x 10/100BASE-T, 1x GbE to P0, and 1x 10/100 BASE-T or GbE) (2) asynchronous EIA-232 serial ports and up to (4) sync/async EIA-232/422/485 serial channels (2) SATA, (2) USB 2.0, (14)DIO, (16) DIFFIO, (2)1553 Software Wind River VxWorks 5.5.1 and 6.x Wind River Linux 3.0 Continuum Vector Signal Processing Software LynxOS and Lynx178B available from Lynx Software Technologies INTEGRITY available from Green Hills Software VxWorks 178B (6.6 cert) available from Wind River

Intel "Bay Trail" Atom processor XMC Quad-core E3845 processor at 1.91 GHz Up to 8 GB DDR3L with ECC at 1,333 MT/s Up to 32 GB SATA NAND flash Quad Gigabit Ethernet ports Serial RS-232/422, USB, SATA, and DIO interfaces Dual display with DVI/DP and VGA outputs Low power (15W typ, 20W max) Supports Linux and Microsoft Windows Available pre-loaded with Cisco IOS Embedded Services Router (ESR) software

Two Xilinx Virtex-5 Platform FPGAs (LX220T) 512 Mbytes of DDR2 SDRAM per FPGA in two banks 36 Mbytes QDR-II+ SRAM per FPGA in four banks 1 GHz 8641D dual-core 8641 processor with 512 Mbytes of DDR2 SDRAM in two banks XMC mezzanine site On-board Serial RapidIO switch Air-cooled and conduction-cooled versions

・Processing 　　・Intel Core i7 4th Generation "Haswell" Quad-Core 　　・6MB L3 Cache 　　・SSE 4.2 floating point ・Intel 4th Generation PCH ・Optional VME 320 interface ・Memory 　　・8/16 GB DDR3 SDRAM (Growth to 32 GB) 　　・8/16 GB NAND Flash (Growth to 64 GB) ・Dual XMC/PMC sites ・External Peripherals 　　・(3) GbE (1x front, 2x rear) 　　・(1) AC97 Stereo Audio 　　・(2) RS-232 　　・(3) RS-422 　　・(8) GPIO 　　・(4) USB (1x front, 3x rear) 　　・(2) SATA

・Quad PowerPC™ 7447A/7448 processors at up to 1.25 GHz ・64 Kbytes L1 and 1 Mbyte (7448) L2 internal caches operating at core processor speed ・Up to 512 Mbytes DDR-250 SDRAM with ECC per processor (2 Gbytes total) ・256 Mbytes Flash with write protection ・128 Kbytes NVRAM ・QuadFlow architecture with 3.2 GB/s peak on-board throughput ・Each processor has Gbe connection to on-board GbE switch ・Two ports from GbE switch routed to backplane ・VME interface with 2eSST support ・Support for two 64-bit, 100 MHz PCI-X mezzanine modules (PMC-X) ・Four EIA-232 serial ports, one per processor node ・Support for StarFabric PMC modules with differential routing to backplane ・Multi-board synchronous timer ・Eight discrete LVTTL I/O signals, 2 selectable as interrupt inputs ・VxWorks® 6.x & 5.x BSPs ・Linux SDK from Curtiss-Wright (2.6 kernel) ・Green Hills INTEGRITY® BSP ・IPC inter-processor communications library ・Gedae graphical development environment support ・Continuum Vector optimized AltiVec DSP function library with VSIPL support ・Range of air and conduction-cooled ruggedization levels available

・Quad PowerPC 8640/8640D processors at up to 1.0GHz ・Up to 1 GB DDR2 SDRAM with ECC per processor ・Each processor has dual 64-bit memory banks ・VPX-REDI format (1" pitch) with 4 Serial RapidIO ports on P1 connector and option for one PCI Express port ・512Mbytes Flash with write-protection ・128 Kbytes NVRAM ・One XMC site supporting PCI Express ・Gigabit Ethernet to all processors with on-board switch ・VxWorks 6.x BSP and Driver Suite supporting Workbench 2.x IDE ・IPC inter-processor communications library ・Continuum Vector DSP function library with VSIPL support ・Continuum Software Architecture (CSA) firmware providing a comprehensive suite of system debug, exerciser, and update functions, BIT, and non-volatile memory sanitization function ・Designed for military harsh-environment applications, both air- and conduction-cooled

・Freescale QorIQ™ P4040/4080 Communications Processor with eight Power Architecture™ processor cores, high-performance datapath acceleration logic, network and peripheral bus interfaces required for mil/aerospace applications 　　・8 E500MC cores at up to 1.5GHz ・Up to 4 GB DDR3 SDRAM with ECC controlled by dual 64-bit controllers ・Full complement of I/O capability (Gigabit Ethernet, serial, USB 2.0, 1553, Serial ATA, TTL and differential discretes...,) ・One PMC/XMC sites supporting parallel PCI or PCI Express, P64S + X12D ・One x8 PCIe XMC site with full complement of XMC I/O, X8D+12D+38S ・Two 64-bit PMCs on independent PCI buses ・VPX/VPX-REDI formats backwards compatible with CWCDS' VPX6-185 ・Software 　　・Curtiss-Wright U-Boot firmware providing a comprehensive suite of system debug, exerciser, and updated functions, BIT, and non-volatile memory sanitization functions 　　・CWCDS Wind River VxWorks 6.x SMP 　　・CWCDS Wind River Linux 4.x 　　・INTEGRITY available from GreenHills Software 　　・MILS 2.1 available from Wind River ・Designed for military harsh-environment applications, both air- and conduction-cooled ・Second generation VPX card in Curtiss-Wright's popular 18x series of VPX single board computers