製品検索結果

Any PMC board can be used on PCI Express, PCI-X, cPCI-X, PCI, cPCI, PC/104-Plus via an adapter. 16 wide-range differential 24-Bit simultaneously-sampled analog input channels. Input sample rates to 105 Kilosamples per second per channel. Software-selectable analog input ranges of +⁄10mV, +⁄100mV, +⁄1V, +⁄10V. Delta-Sigma input conversion minimizes or eliminates the need for antialias filtering. 256K-sample analog input and output FIFO buffers. Continuous and burst (one-shot) sampling modes. Sample clock source selected as internal or external. Supports multiboard synchronization of analog inputs. On-demand internal offset and gain autocalibration of all analog inputs. 4-Bit bi-directional digital port. 66MHz PCI support, with universal 5V/3.3V signaling and DMA support. Large FPGA supports optional features such as counter/timers. Available on adapters for alternate form factors, including PCI, cPCI and PC104-Plus, as well as PCI-Express, PCIX and cPCIX

8 Differential 24-Bit Analog Input Channels Delta-Sigma Converter per Channel, with Linear Phase Digital Antialias Filtering Sample rates from 2 KSPS to 200 KSPS per Channel Software-Selectable Input Ranges: ±2.5V, ±5V, ±10V 256 K-sample FIFO Buffer Synchronous or Independent ADC Clocking Internal Sample Rate Generators Hardware Sync and Clock I/O for Multiboard Synchronization Supports GPS Synchronization to a 1PPS Input Low Phase Skew; Typically Less than 55ns with Fsig < 0.35*Fsamｐ DMA Engine Supports both Block-Mode and Demand-Mode Transfers Low Power Consumption. 6 Watts Typical. Only +5VDC Required from PCI bus. 100dB Dynamic Range to 100KSPS; 93 dB SINAD On-demand Autocalibration Ensures DC Precision as well as AC performance Integrated DC/DC Conversion and Regulation of Precision Internal Supply Voltages Conforms to PCl Bus Specification, Revision 2.3, with Universal Signaling Triggered Acquisition feature supports external acquisition triggering

12 wide-range 24-Bit simultaneously-sampled analog input channels. Supports IEPE (Integral Electronic Piezoelectric) transducers. Software-controlled Constant Current IEPE excitation with +24 V compliance, Factory- configurable from 1-8 mA. Precision DC and low-noise dynamic performance. Software-selectable analog input ranges of ±10 mV, ±100 mV, ±1 V, ±10 V. Input sample rates to 105 Kilosamples per second per channel. Delta-Sigma input conversion minimizes or eliminates the need for antialias filtering. MMCX coaxial connectors for 12 IEPE or voltage input channels. Coaxial interface for external clock and sync I/O. 105dB dynamic range with no postfiltering. Supports multiboard synchronization. Software-selectable AC or DC input coupling. AC low-frequency cutoff factory-configurable from 0.5-10 Hz. 256 K-sample analog input FIFO buffer. Continuous and Triggered-Burst sampling modes. On-demand internal offset and gain autocalibration of all analog inputs. Call for availability in alternate form factors, including PCI and cPCI, as well as 8-channel versions for PC104-Plus, PCIe104-Plus and PMC form factors.

6 Differential 24-Bit Analog Input Channels Delta-Sigma Converter per Channel, with Linear Phase Digital Antialias Filtering Sample rates from 2 KSPS to 200 KSPS per Channel Software-Compatible, and I/O Connector-Compatible with PC104P-24DSI12 256 K-sample FIFO Buffer Synchronous or Independent ADC Clocking Internal Sample Rate Generators Hardware Sync and Clock I/O for Multiboard Synchronization Supports GPS Synchronization to a 1PPS Input Low Phase Skew; Typically Less than 55ns with Fsig < 0.35*Fsamp DMA Engine Supports both Block-Mode and Demand-Mode Transfers 110dB Dynamic Range to 100KSPS; 98 dB SINAD Integrated DC/DC Conversion and Regulation of Precision Internal Supply Voltages

6 Multirange differential 24-Bit simultaneously-sampled analog input channels. Input sample rates from 10 to 500 Kilosamples per second per channel, software-selectable; including 327.680 KSPS. Fixed ±6V input range. Contact factory for availability of optional input ranges of ±10V, ±5V or ±2.5V. Delta-Sigma input conversion minimizes or eliminates the need for antialias filtering. 256K-sample analog input FIFO buffer. Continuous and Burst (One-shot) sampling modes. Sample clock source selected as internal or external. Supports multiboard synchronization of analog inputs. On-demand internal offset and gain autocalibration of all analog inputs. Software-controlled Front-Panel LED indicator. 8-Bit bi-directional digital TTL port. Front-Panel system I/O connections. 66MHz 32-bit PCI support where applicable, with universal 5V/3.3V signaling and DMA support.

20 Multirange differential 24-Bit simultaneously-sampled analog input channels. Input sample rates from 2 to 500 Kilosamples per second per channel, softwareselectable; including 327.680 KSPS. Fixed +⁄-6V input range. Contact factory for availability of software-selectable input ranges of +⁄-10V, +⁄-5V, +⁄-2.5V and +⁄-1.25V. Delta-Sigma input conversion minimizes or eliminates the need for antialias filtering. 512K-sample analog input FIFO buffer. Continuous and Burst (One-shot) sampling modes. Sample clock source selected as internal or external. Supports multiboard synchronization of analog inputs. On-demand internal offset and gain autocalibration of all analog inputs. Software-controlled Front-Panel LED indicator. 8-Bit bi-directional digital port. Software-controlled master-clock frequency fine-adjustment. cPCI 6U form factor. (Contact factory for availability in PCI and PCI-Express form factors). Front-Panel system I/O connections, 66MHz 64-bit PCI support, with universal 5V/3.3V signaling and DMA support. PCI burst rates to 400MB/sec

The high-density 12AI64 board provides cost effective 1,500,000 conversions-per-second 12-bit analog input capability in a single width PMC format. The inputs are configurable either as 64 single-ended channels or as 32 differential channels,and the input range can be software selectable as 10V, 5V or 2.5V. Scan rates can be controlled from either (a) an internal rate generator, (b) through an external digital input, or (c) by direct software commands. Multiple 12AI64 boards can be connected together for synchronous scanning. Data buffering is accomplished through a 64K sample FIFO. Internal auto calibration networks permit calibration to be performed without removing the board from the system.

The high-density PMC-16AI64 board provides a cost effective 500,000 conversions-per-second 16-bit analog input capability in a single-width PMC format. The inputs are configurable either as 64 single-ended channels or as 32 differential channels, and the input range can be software selectable as ±10V, ±5V or ±2.5V. Scan rates can be controlled from either (a) an internal rate generator, (b) through an external digital input, or (c) by direct software commands. Multiple PMC-16AI64 boards can be connected together for synchronous scanning. A 64K-sample FIFO provides maximum buffering of input data. Internal auto calibration networks permit calibration to be performed without removing the board from the system. Available in PMC, PCI, cPCI and PC104-Plus and PCI Express form factors as: PMC-16AI64: PMC, Single-width PCI-16AI64: PCI, short length cPCI-16AI64: cPCI, 3U PC104P-16AI64: PC104-Plus PCIe-16AI64: PCI Express PCIe104-16AI64: PCIe, one-lane on PC/104 form factor

64 Analog Inputs with Dedicated 200KSPS 16-Bit ADC per Channel Simultaneous Sampling of all Inputs; Minimum Data Skew Sampling Rates to 200 KSPS per Channel (12.8 MSPS Aggregate Rate) D32 / D64; 33MHz, 66MHz PCI Compatibility, with Universal 5V/3.3V Signaling Increased Throughput Capacity with Local Data Packing Selectable Differential Processing Simulates Differential Operation of Channel Pairs Input Ranges: ±10V, ±5V, ±2.5V, 0/+5V, 0/+10V; Software-Selectable Hardware Sync I/O for Multiboard Operation 1 MByte FIFO Data Buffer 2-Channel DMA Engine Sampling Controlled by Internal Rate Generator, by Software Trigger, or Externally On-Demand Internal Autocalibration of all Channels Completely Software-Configurable; No Field Jumpers Auxiliary PXI Triggering Port Available through P1, P2.

Two-Channel, 14-Bit Wideband Analog Input Board Sampling Rates to 50 MSPS per Channel Sustainable Aggregate Conversion Rates to 100 MSPS Two Wideband Analog Inputs with a Dedicated 14-Bit ADC per Channel Software-Selectable Input Ranges: ±10V, ±5V, ±2.5V. Optional Input Ranges: ±2.5V, ±1.25V, ±0.625V, or Transformer-Coupled 2Vp-p, 1Vp-p DC Accuracy as well as AC performance 1-MByte FIFO Data Buffer 66MHz PCI Compatibility and DMA Engine Provide Maximum Throughput Sync-on-Level and Pretrigger Oscilloscope Triggering Functions Software-Configurable Data Path Supports Data Packing Both Coaxial and Ribbon-Cable System Connections are Supported Simultaneous Sampling on both Channels Sample Clocking Supplied by Internal Rate Generator or External Source Hardware Sync I/O for Multiboard Synchronization On-Demand Internal Autocalibration in High-Level and Wideband Configurations Conforms to PCI Local Bus Specification, Revision 2.3, with Universal Signaling Single-width Conduction Cooled PMC Form Factor