条件に該当する製品248件
-
16HSDI( High-Speed Sigma-Delta A/D to 1.1M Samples/ Sec per Channel Precision/ Wideband Audio)
GneralStandardsCorporation A/D PMC/XMC 物理 天体The PMC-16HSDI analog input board provides four or six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 30 KSPS to 1.1M SPS, for a maximum aggregate rate of 4.4 MSPS. The input range is software selectable as ±1.25V, ±2.5V, ±5V or ±10V. Click here for more information on Sigma-Delta!
-
16SDI-HS( 16-Bit, Six-Channel Sigma-Delta Analog Input PMC Board With 1.1 MSPS Sample Rate per Channel, Two Independent Clocks)
GneralStandardsCorporation A/D PMC/XMC 物理 天体Sigma-Delta Conversion; No External Antialiasing Filters Required High Effective Sampling Rate; 16-32 Times the Effective Rate of Successive Approximation Converters Operating at the Same Conversion Rate Integral Antialiasing Input Filters Reject Out-of-Band Interference Components Software-Selectable Ranges: 1.25 Volts, 2.5 Volts, 5 Volts or 10 Volts Six 16-Bit Analog Input Channels; Dedicated Sigma-Delta Converter per Channel Sample Rates Adjustable up to 1,100 K-Samples per Second per Channel Two Independent Sample-Rate Generators; Adjustable with 0.2 Percent Resolution Low Noise; Less than 130µVRMS on 1.25 Volt Input Range 64K-Sample FIFO Buffer with 2-Channel DMA support. All Data is Channel-Tagged. Harmonic Sampling Supported, with Clocking Ratios Between Channels from 1 to 20 Auto calibration Uses Hardware Correction; No missing Codes Introduced Integral Shield Assures Minimum Susceptibility to Radiated Noise in PMC Environments
-
16AI64SL(64-Channel Analog Input Board With 1024-Point Scan List)
GneralStandardsCorporation A/D PMC/XMC 試験 環境64 Single-Ended or 32 Differential Analog Input Channels 16-Bit High-Speed Scanning ADC Scanning Rates to 350K Channels per Second (500KSPS Sampling Rate in Single-Channel Mode) 1024-Point Scan List Controls Channel Sequence and Range 64K FIFO Buffer or Dual 32K-Sample Swinging Buffers Software-Selected Analog Ranges: �2.5V, �5V, �10V, 0-5V, 0-10V Optional 32 Current Inputs; 4-20ma, 0-20ma 66 MHz PCI Support
-
16AI4O20(24-Channel 16-Bit Analog Input/Output Board with 20 Analog Outputs and Four Simultaneous Analog Inputs)
GneralStandardsCorporation アナログI/O PMC/XMC 物理 天体20 Analog Output Channels 16-Bit Dac per channel 400 KSPS Clocking Rate per Channel Dynamic Control of Clocking Rate Open and Circular Buffer Operation 32K-Sample FIFO Buffer or Direct-Register Access 4 Simultaneous Differential Analog Input Channels 16-Bit ADC per channel Simultaneous Sampling 200 KSPS Sampling Rate per Channel 32K-Sample FIFO Buffer or Dual 16K Swinging Buffers Software-Selected Analog Ranges: �2.5V, �5V, �10V, 0-5V, 0-10V 8-Bit Bidirectional Digital I/O Port 512 Byte FIFO I/O Buffer Supports Pattern Generation Configurable as Input or Output Port 66 MHz PCI Support
-
PMC66-16AIO32C500KHV(32-Channel 16-Bit Differential Low-Glitch PMC Analog Output Board)
GneralStandardsCorporation D/A PMC/XMC 物理 天体Any PMC board can be used on PCI Express, PCI-X, cPCI-X, PCI, cPCI, PC/104-Plus via an adapter. Precision 16-Bit Low-Glitch analog output channels: DAC per Channel Up to 32 two-wire single-ended outputs with remote ground sensing Software-selectable input/output ranges of +⁄-10V, +⁄-5V, or +⁄-2.5V. Optional high-voltage range sets of +⁄-16V, +⁄-8V, +⁄-4V bipolar , or 0 to +32V, +16V, +8V unipolar. Low glitch impulse and low digital feedthrough Output clocking rates to 500K samples per second per channel with all channels active Optional Disconnectable Outputs for parallel redundancy applications Subset of disconnected outputs available as Scanned Analog Inputs with FIFO buffer Scanned analog inputs can monitor digital input signals 66MHz PCI Bus support with Block-mode and Demand-mode DMA transactions 256K-Sample output data FIFO buffer; Configurable as open or closed (circular) Simultaneous or sequential output clocking Multiboard synchronization supported Continuous and Triggered-Burst output modes support seamless waveform sequencing Data clocking rate controlled internally or externally High accuracy ensured by on-demand Autocalibration of all channels Available on adapters for alternate form factors, including PCI, cPCI and PC104-Plus, as well as PCI-Express, PCIX and cPCIX
-
16AO16M2 (16-Channel, 16-Bit, 2MSPS Low-Glitch PMC Analog Input/Output Board)
GneralStandardsCorporation アナログI/O PMC/XMC 物理 天体Sixteen Precision 16-Bit Low-Glitch analog output channels: DAC per Channel Outputs are software-selectable as 2-wire single-ended, or as 3-wire differential Output data rates to 2 Megasamples per second per channel; 32MSPS aggregate rate. Optional Disconnectable Outputs for parallel redundancy applications Software-disconnected outputs available as low-rate scanned analog inputs, capable of monitoring either analog or digital signals Low glitch impulse; 2nV-sec on ±5V range Software-selectable output ranges of ±10V, ±5V, or ±2.5V 66MHz PCI Bus support with Block-mode and Demand-mode DMA transactions 256K-Sample output data FIFO buffer; Configurable as open or closed (circular) Simultaneous or sequential output clocking Multiboard synchronization supported Continuous and Triggered-Burst output modes support seamless waveform sequencing Data clocking rate controlled internally or externally High accuracy ensured by on-demand Autocalibration of all channels Available on adapters for alternate form factors, including PCI, cPCI and PC104-Plus, as well as PCI Express, PCIX and cPCIX
-
16AO48C( 16-Bit, 48/64-Channel, 500KSPS PMC Analog Output Board)
GneralStandardsCorporation D/A PMC/XMC 物理 天体Precision 16-Bit analog outputs: DAC per Channel Software-configurable as either 48 single-ended outputs, or as 24 balanced-differential outputs. Software-selectable output ranges of +?-10V, +?-5V,+?-2.5V, 0 to +10V, or 0 to +5V. Output clocking rates to 500K samples per second per channel with all channels active Outputs software-disconnectable from loads; Supports redundancy applications 66MHz PCI Bus support with Block-mode and Demand-mode DMA transactions 256K-Sample output data FIFO buffer; Configurable as open or closed (circular) Simultaneous or sequential output clocking Settling to 0.01 percent in 8us Multiboard synchronization supported Continuous and Triggered-Burst output modes support seamless waveform sequencing Data clocking rate controlled internally or externally High accuracy ensured by on-demand Autocalibration of all channels, with outputs forced to zero during autocalibration. Available on adapters for alternate form factors, including PCI, cPCI and PC104-Plus, as well as PCI-Express, PCIX and cPCIX
-
24DSI8C500K (24-Bit, 8 or 6-Channel, 500KSPS, Analog Input Module With High Static Accuracy)
GneralStandardsCorporation A/D PMC/XMC 物理 天体Eight or Six Multirange differential 24-Bit simultaneously-sampled analog input channels. Input sample rates from 10 to 500 Kilosamples per second per channel, software- selectable. Software-selectable ranges of +/-10V, +/-5V, +/-2.5V, +/-1.25V (Optional ranges available). High static (DC) accuracy. Low offset and gain errors. Delta-Sigma input conversion minimizes or eliminates the need for antialias filtering. 256K-sample analog input FIFO buffer. Continuous and Burst (One-shot) sampling modes. Sample clock source selected as internal or external. Supports multiboard synchronization of analog inputs. On-demand internal offset and gain autocalibration of all analog inputs. PMC and PCI versions Conform to PCl Bus Specification, Revision 2.3, 66/33 MHz. 8-Bit bi-directional digital TTL port. Standard single-width PMC form factor, with front-Panel system I/O connections.
-
20AO12C500K(20-Bit 12-Output 500KSPS Precision Wideband Analog Output Board)
GneralStandardsCorporation D/A PC104 試験 環境12 single-ended or 3-Wire differential 20-Bit analog output channels (8 channels in PMC and PC104P form factors) Simultaneous clocking; individual R-2R 20-Bit DAC per output channel DC to 500KSPS Sample Rate per Channel; 0-6 MSPS aggregate rate Optional Outputs-Disconnect feature supports multiple-board redundancy, and eliminates outputs activity during autocalibration Output ranges: 10V or 5V, software-selectable (Other ranges available) 256K-sample output FIFO buffer 8 Bidirectional Digital I/O lines; software-selectable TTL or LVDS compatibility Internal sample rate generator with 24-Bit rate divider Hardware Sync and Clock I/O for multiboard synchronization; front-panel and Internal access DMA Engine supports Block-mode and Demand-mode transfers On-demand autocalibration Integrated DC/DC conversion and dual regulation for internal supply voltages Available also in PMC, PCI, PC104 Plus and CPCI 3U form factors. Contact Sales for details.
-
16HSAO2C(2-Channel, 16-Bit, 40 MSPS/Channel, PCI Express Analog Output Board)
GneralStandardsCorporation D/A PCI Express 物理 天体Two wideband 16-Bit 40 MSPS analog output channels Single-ended or 3-Wire differential output configuration; software-selectable Common simultaneous or sequential output clocking rates from zero to 40 MSPS Software-selectable output ranges: ±3V, ±1.5V, ±0.75V, with ±10mA loading Optional ±10V, ±5V, ±2.5V ranges available, with reduced throughput and loading 512-Ksample capacity FIFO data buffer, with DMA support Software-controlled Outputs-Disconnect feature supports redundancy applications 18-Bit 500-KSPS ±3V analog input channel Byte-wide digital I/O port Local data packing provides maximum throughput Output clocking derived from internal rate generator or external source Direct 24-Bit division of master clock for rate generation, or internal PLL for high resolution timing Simultaneous or sequential output clocking Dynamic control of common output clocking rate Hardware clock and sync I/O for multiboard synchronization On-demand internal autocalibration ensures maximum accuracy under all Conditions Standard PCI Express short-card form factor (Expanded-capability version available in full-length PCI Express form factor. Also available in PMC, PC104 Plus, CPCI and standard PCI form factors. Contact Sales for details).