製品検索結果

64 Analog Inputs with Dedicated 200KSPS 16-Bit ADC per Channel Simultaneous Sampling of all Inputs; Minimum Data Skew Sampling Rates to 200 KSPS per Channel (12.8 MSPS Aggregate Rate) D32 / D64; 33MHz, 66MHz PCI Compatibility, with Universal 5V/3.3V Signaling Increased Throughput Capacity with Local Data Packing Selectable Differential Processing Simulates Differential Operation of Channel Pairs Input Ranges: ±10V, ±5V, ±2.5V, 0/+5V, 0/+10V; Software-Selectable Hardware Sync I/O for Multiboard Operation 1 MByte FIFO Data Buffer 2-Channel DMA Engine Sampling Controlled by Internal Rate Generator, by Software Trigger, or Externally On-Demand Internal Autocalibration of all Channels Completely Software-Configurable; No Field Jumpers Auxiliary PXI Triggering Port Available through P1, P2.

Two-Channel, 14-Bit Wideband Analog Input Board Sampling Rates to 50 MSPS per Channel Sustainable Aggregate Conversion Rates to 100 MSPS Two Wideband Analog Inputs with a Dedicated 14-Bit ADC per Channel Software-Selectable Input Ranges: ±10V, ±5V, ±2.5V. Optional Input Ranges: ±2.5V, ±1.25V, ±0.625V, or Transformer-Coupled 2Vp-p, 1Vp-p DC Accuracy as well as AC performance 1-MByte FIFO Data Buffer 66MHz PCI Compatibility and DMA Engine Provide Maximum Throughput Sync-on-Level and Pretrigger Oscilloscope Triggering Functions Software-Configurable Data Path Supports Data Packing Both Coaxial and Ribbon-Cable System Connections are Supported Simultaneous Sampling on both Channels Sample Clocking Supplied by Internal Rate Generator or External Source Hardware Sync I/O for Multiboard Synchronization On-Demand Internal Autocalibration in High-Level and Wideband Configurations Conforms to PCI Local Bus Specification, Revision 2.3, with Universal Signaling Single-width Conduction Cooled PMC Form Factor

Four-Channel, 14-Bit Wideband Analog Input Board Sampling Rates to 50 MSPS per Channel; Four Wideband Analog Inputs with a Dedicated 14-Bit ADC per Channel Sustained Aggregate Rates to 100 MSPS Software-Selectable Input Ranges: �2.5V, �1.25V, �0.625V. Optional Input Ranges: �10V, �5V, �2.5V, or Transformer-Coupled 2Vp-p, 1Vp-p 1-MByte FIFO Data Buffer 66MHz PCI Compatibility and DMA Engine Provide Maximum Throughput Software-Configurable Data Path Supports Data Packing Coaxial or Ribbon Cable Inputs Simultaneous Sampling of All Channels Sample Clocking Supplied by Internal Rate Generator or External Source Hardware Sync I/O for Multiboard Synchronization On-Demand Internal Autocalibration: High DC Accuracy as well as AC performance Conforms to PCI Local Bus Specification, Revision 2.3, with Universal Signaling

The 16-channel PCI-16SDI analog input board provides high-density precision 16-bit analog input resources on a standard PCI expansion board, and requires no external filters for antialiasing. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. Each of the 16 sigma-delta analog input channels can be controlled by any one of four independent sample clocks, and multiple channels can be harmonically locked together. A deep FIFO buffer holds up to 256K channel-tagged input samples. A/ D conversions on multiple boards can be synchronized and phase-locked. Sample rates from 5 to 220 KHz per channel.

32 Differential or 64 Single-Ended 16-Bit Scanned Analog Voltage Input Channels 32-Channel Precision Scanning Excitation Current Source; 0.4ma to 10ma Options Input Ranges Selectable as ±10V, ±5V or ±2.5V Excitation Applied to any Channel Combination Under a Control Mask High Input Impedance for Channels Not Requiring Excitation Scan Rate Internally Adjustable from 0.06 to 3000 32-Channel Scans per Second External Hardware Sync Input/Output (Alternate Function for Channel 31) Data Buffered through a 64K-sample FIFO Continuous and Burst (One-Shot) Input Modes Scan Sizes from Two to 32 Channels-per-Scan; or Single-Channel sampling of any Channel On-Demand Internal Autocalibration DMA Engine Supports Block Mode Transfers Completely Software-Configurable; No Field Jumpers Single-width PMC Form Factor with EMI Shield and Panel Bezel

32 Differential Analog Inputs with Dedicated 200KSPS 16-Bit ADC per Channel Sampling Rates to 200 KSPS per Channel (6.4 MSPS Aggregate Rate) Simultaneous Sampling of all Inputs; Minimum Data Skew D32; 66MHz, 33MHz PCI Compatibility, with Universal 5V/3.3V Signaling Input Ranges: +⁄2.5V, +⁄5, +⁄10V; Software-Selectable Sync and Clock I/O Support External Control and Multiboard Configrations Increased Throughput Capacity with Local Data Packing Continuous, Burst and Single-Sample Clocking Modes Hardware Sync I/O for Multiboard Operation 1 MByte FIFO Data Buffer; 512 K-Samples in packed-data mode. 2-Channel DMA Engine Sampling Controlled by Internal Rate Generator, by Software Trigger, or Externally On-Demand Internal Autocalibration of all Channels Single-width PMC Form Factor High-Density Analog Inputs Industrial Robotics Acoustic Sensor Arrays Analog Event Capture Biometric Signal Analysis Dynamic Test Systems

32 Differential Analog Inputs with Dedicated 200KSPS 16-Bit ADC per Channel Compatible with Conduction-Cooled or Air-Cooled Hosts Without Faceplate Rear-Panel I/O Through P4 Factory-Configurable as either 31 Differential Channels with 2 Ground Pins, or as 32 Channels Consisting of 25 Differential Channels and 7 Pseudo-Differential Channels with a Common Inverted Input and Sync and Clock I/O. Simultaneous Sampling of all Inputs; Minimum Data Skew Sampling Rates to 200 KSPS per Channel (6.4 MSPS Aggregate Rate) D32; 66MHz, 33MHz PCI Compatibility, with Universal 5V/3.3V Signaling Increased Throughput Capacity with Local Data Packing Continuous, Burst and Single-Sample Clocking Modes Input Ranges: ±2.5V, ±1.25V, ±0.625V; Software-Selectable. An optional range set of ±10V, ±5V, ±2.5V is available. Hardware Sync I/O for Multiboard Operation 1 MByte FIFO Data Buffer; 512 K-Samples in packed-data mode. 2-Channel DMA Engine Sampling Controlled by Internal Rate Generator, by Software Trigger, or Externally On-Demand Internal Autocalibration of all Channels Single-width PMC Form Factor

32 Differential Analog Inputs with dedicated 1.0MSPS SAR 18-Bit ADC per channel; Exceptional combination of precision, throughput and channel density on PMC Simultaneous Sampling of all inputs; minimum data skew Sampling rates from zero to 1.0 MSPS per channel (32 MSPS aggregate rate) True Differential inputs minimize input noise and system interference Input ranges: +/-10V, +/-5V, +/-2.5V software-selectable 256 K-Sample FIFO data buffer SAR (successive approximation) ADCs provide true simultaneous sampling without a minimum sample rate limitation D32; 66MHz/33MHz PCI compatibility, with universal 5V/3.3V signaling 2-Channel DMA engine supports both block and demand mode DMA transactions Sampling controlled by an internal rate generator, by a software trigger, or externally Continuous, burst and single-sample clocking modes Hardware sync I/O for multiboard operation through both front-panel and internal ports On-Demand internal autocalibration of all channels Completely software-configurable; No field jumpers Single-width PMC form factor with integral EMI shield Available also with 16-Bit resolution at reduced cost

Six differential analog inputs with dedicated 18-Bit ADC per channel True simultaneous sampling of all inputs to 500 KSPS per channel SAR architecture; No minimum sample rate Software-selectable input ranges 1: +⁄-20V (40Vpp), +⁄-10V, or optional +⁄-10V, +⁄-5V ranges Independent 256-Ksample Input FIFO data buffer Low noise; >98 dB dynamic range with antialias filter disabled Integral antialias filter minimizes out of band components, 200kHz 5th order Chebyshev Hardware Clock and Sync I/O for multiboard Operation Timing controlled by internal rate generators, by software clocking, or externally Internal on-demand autocalibration 8-Bit Bidirectional TTL Digital I/O Port Two independent 24-Bit frequency dividers. Completely software-configurable; No field jumpers 66 MHz 32-Bit PCI support, with universal 5V/3.3V signaling DMA engine minimizes bus congestion Single-width PMC form factor with Integral EMI shield Internal power conversion; Dual regulation for maximum supply integrity Available on adapters for alternate form factors, including PCI, cPCI and PC104-Plus, as well as PCI-Express, PCIX and cPCIX

64 Analog inputs with dedicated 18-Bit SAR ADC per Channel Simultaneous sampling of all inputs; Minimum Data Skew Sampling Rates to 750 KSPS per channel (48 MSPS aggregate rate) Continuous, Burst and Single-Sample Clocking Modes Software and I/O pinout compatibility with the 16AI64SSA/C Selectable Differential Processing Simulates Differential Operation of Channel Pairs Input Ranges software-selectable as ±10V, ±5V, 0 to +5V or 0 to +10V Hardware Sync I/O for Multiboard Operation FIFO buffer provides 256 K-Sample data capacity at 18 bits; 512K at 16 bits with data packing. A software-selectable low-latency configuration provides 64 registers that duplicate the last sample from all A/D converters 2-Channel DMA Engine Sampling and burst triggering controlled by internal rate generators, or by direct software control, or externally On-demand internal autocalibration of all channels Completely software-configurable; No field jumpers D32; 66MHz, 33MHz PCI compatibility, with universal 5V/3.3V Signaling Internal Sync/Clock I/O connector provides behind-panel access to clock and sync signals PMC version protected with integral EMI shield over analog components