条件に該当する製品93件
-
Adapter: PMC-X into PCI-X
Technobox キャリア拡張カード PMC/XMC 試験 環境・32-bit and 64-bit up to 133MHz operation ・Enables a PMC/PMC-X module to be installed in a PCI system API Interface ・The API Interface supports analyzer trace capturing with predefined setups ・The API Interface supports protocol checker functionality and most Exerciser functionalities ・The API Interface provides programming language and platform-independent interface to Vanguard Bus Analyzers
-
Adapter: PMC-X into PCI-X
Technobox キャリア拡張カード PMC/XMC 試験 環境・32-bit and 64-bit up to 133MHz operation ・Enables a PMC/PMC-X module to be installed in a PCI system API Interface ・The API Interface supports analyzer trace capturing with predefined setups ・The API Interface supports protocol checker functionality and most Exerciser functionalities ・The API Interface provides programming language and platform-independent interface to Vanguard Bus Analyzers
-
Adapter: 4774 PMC to PCI
Technobox キャリア拡張カード PMC/XMC 試験 環境・32-bit or 64-bit at 33MHz support ・Enables a PMC device to be installed in a PCI slot ・Supports 3.3V
-
Adapter: PMC to cPCI
Technobox キャリア拡張カード PMC/XMC 試験 環境・Standard PMC I/O connector through the cPCI front panel ・3U CompactPCI Form Factor (100mm high x 160mm deep) ・6U conversion kit available ・Only one slot (3U x 4HP) required ・High quality, multilayer design: 4 power planes, GND, 3.3V, 5V VIO, 4 signal layers ・Passive Series Termination ・64 User I/O lines routed to CompactPCI connector ・2 Status LEDs ・IRQ Request from PMC (PMC Bus master)
-
Adapter: PCI Extender Card
VadaTech 評価用ボード PCI Express 試験 環境・64-bit and 32-bit PCI ・Live insertion of DUT ・Current Limiter ・Supports PCI clock speeds up to 66.7 MHz
-
PCIe-20AOF4C500K(20-Bit 4-Output 500KSPS Precision Wideband PCI Express Short-card Analog Output Board )
GneralStandardsCorporation D/A PCI Express 物理 天体 Four 20-Bit analog output channels. Software-selectable output configuration: 2-Wire Single-ended or 3-Wire Differential. Simultaneous Clocking; Individual 20-Bit R-2R DAC per output channel. Clocking rates from zero to 500KSPS. Software-selectable fullscale output ranges: ±10V and ±5V. 8th-Order reconstruction filter in each output channel. Optional Outputs Disconnect feature ensures quiet outputs during autocalibration and selftest operations. Software control. Adds 1-Ohm to R-out. Remote ground sensing to minimize single-ended errors. On-demand autocalibration of all channels. 256K-sample output FIFO buffer. Internal sample rate generator with 24-Bit rate divider. Hardware trigger and clock I/O for multiboard synchronization. Eight Bidirectional digital TTL I/O lines. Conforms to PCI Express Specification revision 1.0a, single-lane. Standard PCI Express Short-card form factor. DMA Engine supports block-mode and demand-mode transfers in two DMA channels.
-
PCIe-16AOF64 (16-Bit, 64/32-Channel, 500KSPS PCI Express Analog Output Board)
GneralStandardsCorporation D/A PCI Express 物理 天体 Precision 16-Bit simultaneously-clocked analog outputs: R-2R DAC per channel Available with either 64 single-ended outputs, or 32 balanced-differential outputs Software-selectable ranges of ±10V, ±5V. Optionally 0 to +10V, or 0 to +5V. Output clocking rates from zero to 500K samples per second per channel. Reconstruction filter in each output channel: 6th order Lowpass, 300Hz-100kHz. Optional Outputs-Disconnect feature supports multiple-board redundancy, and eliminates outputs activity during autocalibration Remote ground-sense input minimizes the effects of interground potentials Supports both Block-mode and Demand-mode DMA transactions 256K-Sample output data FIFO buffer; Configurable as open or closed (circular) Simultaneous output clocking, with emulated sequential outputs also supported Multiboard synchronization supported Continuous and Triggered-Burst output modes support seamless waveform sequencing Data clocking rate controlled internally or externally High accuracy ensured by on-demand Autocalibration of all channels x1 Link PCI Express Port operating at 2.5Gbps Available on multiple form factors, including PCI, and cPCI, as well as PC104-Plus, PMC, PCIX and cPCIX with reduced channel count. Contact Sales for availability
-
20AO8C500K( 20-Bit Eight-Output 500KSPS Precision Wideband Analog Output Board)
GneralStandardsCorporation D/A PCI Express 物理 天体Eight Single-ended or 3-Wire Differential 20-Bit analog output channels. Simultaneous Clocking; Individual R-2R 20-Bit DAC per output channel. Clocking rates from zero to 500KSPS. Software-selectable fullscale output ranges: ±10V and ±5V; Optionally ±5V and ±2.5V. 256K-sample output FIFO buffer. Low Glitch Impulse; Typically 3.8nV-Sec on ±5V range. Low-Noise DACs and output sections produce 95dB SNR. Clocking from either external or internal sample rate generator. Hardware trigger and clock I/O for multiboard synchronization; Selectable as LVDS or TTL. 8 Bidirectional TTL Digital I/O lines. PCI Express version conforms to PCI Express Specification revision 1.0a for short cards Optional Outputs Disconnect feature supports multiple card redundancy, and ensures quiet outputs during autocalibration and selftest operations. Same pinout as that used for the PCIe-18AO8, with similar software interface. Available also in 16-Channel configuration in full-length format, as well as in PMC and PCI formats DMA Engine supports block-mode and demand-mode transfers. Remote ground sensing to minimize single-ended errors. On-demand autocalibration of all channels.
-
OPTO16X16(Optically-Isolated I/ O with Change-of-State Interrupts)
GneralStandardsCorporation デジタルI/O PCI Express 試験 環境The PCIe-OPTO16x16 board is a high performance Single Lane PCI Express card offering 16 Opto-Isolated inputs and 16 Opto-Isolated outputs.
-
DIO32A-S( 32 Port Digital I/O PCIe Card With RS422/RS485 Transceivers)
GneralStandardsCorporation シリアル PCI Express 試験 環境One Lane PCI Express (PCIe) Interface RS422/RS485 Differential Transceivers 32 IO Bits individually configurable as Inputs or Outputs Outputs can be individually tri-stated Inputs can be programmed to trigger an interrupt on Change of State (H-L and L-H) Interrupts can be individually programmed to trigger an output change on any or all Outputs SCSI type 68 pin front edge I/O Connector Breakout Board available User changeable Termination Resistors (120 Ohm installed) - blocks of four signals (SIPS) Available drivers include VxWorks, WinNT, Win2k, WinXP, Linux, and Labview Industrial Temperature Option Available