条件に該当する製品121件
-
HPDI32ALT(TTL or LVDS 32-bit Digital I/O)
GneralStandardsCorporation LVDS PMC/XMC 試験 環境The PMC64-HPDI32ALT board is a flexible bi-directional 32-bit digital I/O board that transmits and receives data from 20 Mbytes (TTL I/O) to 200 Mbytes (LVDS) per second. This board provides a 64-bit 66MHz PCI interface capable of 400Mbytes/sec burst rate. The board is useful as a general-purpose DMA interface to a variety of external peripherals. The DMA engine is capable of transferring data to/ from Host memory using D32 block transfers, while the FIFO memory (up to One Mbyte of total FIFO) provides continuous transmission of data without interrupting the DMA transfers or requiring intervention from the Host CPU. The board has 7 bi-directional programmable handshake lines to allow easy interfacing to most digital I/O peripherals
-
HPDI32A(High-speed Digital I/O (Flexible Cable Interface))
GneralStandardsCorporation デジタルI/O PMC/XMC 鉄道/交通The PMC-HPDI32A board is a fast and flexible bi-directional 32-bit digital I/O board that transmits and receives data up to 80 Mbytes (differential I/O) or up to 200 Mbytes (Pseudo ECL I/O) per second. The board is useful as a general purpose DMA interface to a variety of external peripherals. The DMA engine is capable of transferring data to/from Host memory using D32 block transfers, while the FIFO memory (up to One Mbyte of total FIFO) provides continuous transmission of data without interrupting the DMA transfers or requiring intervention from the Host CPU. The board has 7 bi-directional programmable handshake lines and eight pre-configured software selectable interface protocols to allow easy interfacing to most digital I/ O peripherals. Available transceivers are RS485/422 and PECL. For TTL and LVDS transceiver versions, please see the PMC64-HPDI32ALT.
-
HPDI32A-DIPHASE(High-Speed Di-Phase Serial I/O (to 10Mbits/sec) with Deep FIFOs)
GneralStandardsCorporation シリアル PMC/XMC 通信・ キャリアThe PMC-HPDI32A-DIPHASE is a full-duplex RS-422/485 serial I/O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.
-
HPDI32A-COS( PMC Digital I/O with Change-of-State)
GneralStandardsCorporation デジタルI/O PMC/XMC 通信・ キャリアThe HPDI32A-COS board is a 32-Bit parallel digital input board that samples input data (via the cable interface) at selectable rates. The board can detect any Change-of-State and store the changed data word data in the on-board FIFO. The board is programmable and can generate an interrupt on the first detected change or upon any desired number of changes. Deep FIFO buffers (128 Kbytes) allow data bursts to be transferred over the PCI bus independent of transfers over the cable. Change-Of-State boards allow for more efficient monitoring of peripheral or industrial type devices (transducers, etc.). The board can also be used in a (logic analyzer) type mode by storing up to 64,000 samples after receipt of a trigger word. FIFOs, DMA engine, PCI controller, differential receivers, and multiple status interrupts provides high bandwidth along with complete board control.
-
HPDI32A-ASYNC( High-Speed Async Serial I/O (to 5Mbits/sec) with Deep FIFOs)
GneralStandardsCorporation シリアル PMC/XMC 通信・ キャリアThe PMC-HPDI32A-ASYNC is a full-duplex RS-422/485 serial I/O board. Each channel can operate up to 5M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.
-
CCVPX-16AO16C(16-Channel 16-Bit High-Speed Conduction-Cooled 3U VPX Analog Output Board With 450,000 Samples per Second per Channel)
GneralStandardsCorporation D/A VPX 防衛16 precision 16-Bit high-speed analog output channels; D/A converter per channel Balanced 3-Wire differential outputs, or optional 2-wire single-ended outputs with remote ground sensing Front-panel system access Standard conduction-cooled 3U VPX form Factor Data rates to 450K samples per second per channel Software-selectable output ranges of ±10V, ±5V, ±2.5V or ±1.25V; optional ±20V,±10V, ±5V differential output ranges 256K-Sample output data FIFO buffer; configurable as open or circular Conforms to PCI Express Specification revision 1.0a; x1 link operating at 2.5Gbps Two DMA channels available for buffer access in either block-mode or demand-Mode Simultaneous or channel-sequential output clocking Multiboard synchronization supported Continuous and burst (one-shot) output modes support seamless waveform sequencing Data rate controlled internally or externally Software-selectable differential clock I/O for synchronizing GSC sigma-delta A/D products Accuracy supported by on-demand auto-calibration
-
6SDI(Sigma-Delta A/Ds to 220K Samples/ Sec per Channel (Precise Instrumentation/ Wideband Audio))
GneralStandardsCorporation PMC/XMC 物理 天体The 6-channel PMC-6SDI analog input board provides six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the six sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 5 KSPS to 220 KSPS per channel, for a maximum aggregate rate of 1320 KSPS, and the input range is software selectable as ±1.25V, ±2.5V, ±5V or ±10V. Click here for more information on Sigma-Delta!
-
16AIO88(The PMC-16AIO88 is a versatile Multifunction analog I/O board. The board has 8 analog inputs and 8 analog outputs per board, and supports arbitrary waveform generation. A single 16-Bit scanning Analog-to-Digital
GneralStandardsCorporation アナログI/O PMC/XMC 試験 環境The PMC-16AIO88 is a versatile Multifunction analog I/O board. The board has 8 analog inputs and 8 analog outputs per board, and supports arbitrary waveform generation. A single 16-Bit scanning Analog-to-Digital converter scans 8 single-ended or 4 differential inputs at an aggregate rate of 72,500 samples per second into the 32,000-sample storage FIFO. Up to 250,000 samples per second aggregate output update rates for the 8 D/A channels. Analog outputs are double-buffered and allow for software or hardware (Synchronized) strobes for output updating. I/O ranges are ±2.5, ±5.0, and ±10.0 volts. Output FIFO buffers provide up to 16,000-sample capacity. Advanced features include: Loopback for Built-in-Test support, automatic calibration, continuous or burst input scanning modes, and runtime calibration trimming implemented in hardware, without Host CPU intervention
-
PMC66-16AO16C2MOD (16-Bit, 16-Channel, 500KSPS PMC Analog Output Board )
GneralStandardsCorporation D/A PMC/XMC 物理 天体Precision 16-Bit simultaneously-clocked analog outputs: R-2R DAC per channel Available with either 16 single-ended outputs, or 16 balanced-differential outputs Software-selectable ranges of ±10V, ±5V. Optionally 0 to +10V, or 0 to +5V. Output clocking rates from zero to 500K samples per second per channel. Optional Outputs-Disconnect feature supports multiple-board redundancy, and eliminates outputs activity during autocalibration Remote ground-sense input minimizes the effects of interground potentials Supports both Block-mode and Demand-mode DMA transactions 2 Megasample output data FIFO buffer; Configurable as open or closed (circular) Simultaneous output clocking Multiboard synchronization supported Continuous and Triggered-Burst output modes support seamless waveform sequencing Data clocking rate controlled internally or externally High accuracy ensured by on-demand Autocalibration of all channels Single-width PMC form facto
-
XMC-24DSI24WRC(Wide-Range 24-Bit, 24-Channel, 200KSPS XMC Analog Input Module)
GneralStandardsCorporation A/D PMC/XMC 防衛24 wide-range differential 24-Bit simultaneously-sampled analog input channels. Sample rates from 1.0 Kilosamples per second (KSPS) to 200 KSPS per channel. Synchronous operation; all channels clocked simultaneously. Software-selectable analog input ranges of ±10V, ±1V, ±100mV, ±10mV. (Optional ±10V, ±5V, ±2V, ±1V ranges, or ±5V, ±0.5V, 50mV, ±5mV ranges also available). Delta-Sigma input conversion minimizes or eliminates the need for antialias filtering. Low noise: 106dB typical dynamic range. 256K-sample analog input FIFO buffer. Sample clock source selected as internal or external. Hardware sync and clock I/O for multiboard synchronization. On-demand autocalibration ensures DC offset precision as well as AC performance. Conforms to PCI Express Specification revision 1.0a, single-lane. DMA engine supports both block-mode and demand-Mode transfers. Integrated DC/DC conversion and regulation of precision internal supply voltages.