条件に該当する製品156件
-
AMC097 – AMC 24-channel Isolated Output Module
VadaTech パラレル AdvancedMC 物理 天体・24-channel isolated output ・Single module, compact size (mid-size and full-size available) ・Front panel I/O connectivity in a half-size AMC compliant form factor ・Input voltage from 10 V to 38 V with 45 V surge @ 500 ms ・Interrupt levels are user selectable ・AMC.1 compliant ・IPMI 2.0 compliant ・RoHS compliant
-
AMC099 – AMC 24-channel Isolated (12 drive, 12 sink) Output Module
VadaTech パラレル AdvancedMC 物理 天体・24-channel isolated output ・Single module, compact size (mid-size and full-size available) ・Front panel I/O connectivity in a compact size AMC compliant form factor ・Input voltage from 10 V to 38 V with 45 V surge @ 500 ms ・Interrupt levels are user selectable ・AMC.1 compliant ・IPMI 2.0 compliant ・RoHS compliant
-
VME-2533
Abaco Systems (旧GE Intelligent Platforms) パラレル VMEbus 鉄道/交通 生産中止品(EOL)・Software compatible with VMIVME-2532 ・Powerup replacement option ・Compatible with VMIC’s family of Intelligent I/O Controllers ・Built-in-Test (all active components are tested) ・Front panel with fail LED ・8-, 16-, or 32-bit transfers ・Each data bit in each 16-bit data word represents one discrete line pair ・RS-422/RS-485 compatible drivers and receivers ・32 bits of differential voltage outputs
-
VME-2232
Abaco Systems (旧GE Intelligent Platforms) パラレル VMEbus 鉄道/交通 生産中止品(EOL)・Front panel with fail LED ・Compatible with the Intelligent I/O Controllers ・Built-in-Test (all active components are tested) ・8-, 16-, or 32-bit data transfers ・Optional contact protection electronics for DC operation ・Software compatible with the VME-2532 and the VME-2533 ・Contact ratings ・32 relay output channels (one form C relay per channel) ・VxWorks driver available
-
VME-1150
Abaco Systems (旧GE Intelligent Platforms) パラレル 鉄道/交通 生産中止品(EOL)・64 optically coupled digital inputs ・5 V to 48 VDC input range ・High isolation, 1,000 V sustained, 7,500 V pulsed ・Double Eurocard form factor with front panel ・8- or 16-bit data transfers ・Dual I/O connectors
-
Abaco Systems (旧GE Intelligent Platforms)
Abaco Systems (旧GE Intelligent Platforms) パラレル VMEbus 鉄道/交通 生産中止品(EOL)・Supports 8- or 16-bit transfers ・High isolation, 1,000 V sustained, 7,500 V pulsed ・Jumper-selectable nonprivileged or supervisory short I/O transfers ・Filtered input debouncing option ・High reliability DIN-type input connector ・5, 12, 24, and 48 V input option ・Wide variety of input signal conditioning ・Contact sense or voltage source options ・COS interrupts
-
VME-3125
Abaco Systems (旧GE Intelligent Platforms) パラレル VMEbus 鉄道/交通 生産中止品(EOL)・Applications: Instrumentation in 3U Form Factor, Isolated Analog Inputs, Isolated Transducer Inputs, Ground Loop Elimination, Data Acquisition Systems, Medium-Rate Voltage Monitoring, Process Monitoring, Temperature Monitoring ・1,000 V analog GND/digital GND isolator ・Low pass input filters: 50 kHz, optional 40 Hz ・Pull-down resistors prevent floating inputs ・offset binary or two's complement ・Overvoltage protected inputs ・Selectable data coding ・Input connector compatible with both discrete wire and ribbon cables ・Jumper-programmable gains of x1, x10, x100 ・Selectable A/D ranges of +/-5 V, +/-10 V, 0 to +10 V ・Supports real-time Built-in-Test ・40 kHz aggregate conversion rate ・Input ranges from +/-50 mV to +/-10 V ・Isolated channel-to-bus ・common channel-to-channel ・Autoscanning ・continuously digitizes inputs and stores results in dual-ported data registers ・32 single-ended or 16 differential inputs ・Operating Systems: Windows NT, Linux, VxWorks, QNX
-
VME-3126
Abaco Systems (旧GE Intelligent Platforms) パラレル VMEbus 鉄道/交通 生産中止品(EOL)・8 or 16 isolated input channels with active guards ・16-bit data ・1,500 VDC (1,000 VAC) isolation, input-to-input and input-to-VMEbus ・Digitizer per channel ・Input ranges of ±50 mV to ±10 V, software-selectable on channel-by-channel basis ・Software-controlled bandwidth, 0.05 to 26 Hz (6 pole low pass filters implemented with internal DSP) ・DSP-based offset and gain correction in real-time ・DSP supported E2PROM stores calibration coefficients (no trimpots) ・Conversion rate of 100 SPS (samples per second) per channel ・RTD excitation under software control (200 mA/400 mA per channel) ・Open transducer detection under software control ・Supported by GE Intelligent Platforms Embedded System's I/O controllers ・Optional current termination resistors ・Optional increased input range
-
VME-1150B
Abaco Systems (旧GE Intelligent Platforms) パラレル VMEbus 鉄道/交通 生産中止品(EOL)・64 optically coupled digital inputs ・5 V to 48 VDC input range ・High isolation, 1,000 V sustained, 7,500 V pulsed ・Double Eurocard form factor with front panel ・8- or 16-bit data transfers ・Dual I/O connectors
-
VME-1184
Abaco Systems (旧GE Intelligent Platforms) カウンター/タイマー VMEbus 鉄道/交通 生産中止品(EOL)・Front panel inputs for configurable counter/quardrature input with daisy chaining capability ・Available with either a standard VME front panel or the IEEE 1101.10 front panel (see ordering options) ・COS detection is programmable on an individual channel basis ・Sequence-of-Event (SOE) monitoring ・Programmable interrupt vector ・COS data is captured in 512 states deep FIFO ・Contact debounce is software selectable ・Front panel LED status indicator for each input ・Input voltage range is field configurable on a channel-by-channel basis (5V, 12V or 24-28V) ・32 channels of optically isolated digital Change-of-State (COS) Inputs connected through the VME P2, rows A and C