条件に該当する製品289件
-
Vortex VR-6511S8
Curtiss-Wright ストレージ VMEbus 防衛 生産中止品(EOL)・Embedded storage using two 6U VXS (VITA 41) SATA Disk Carriers, each holding four 2.5” SATA disks, solid state or rotating hard disk drives ・High-speed off-load ・Compact Rugged Data Recorder ・VXS VITA41 data recording and playback system
-
VME/VXI-MIO
Abaco Systems （旧GE Intelligent Platforms） 1553/ARINC VMEbus 防衛 生産中止品(EOL)・Up to 64 ARINC 429 channels per board (32 Rx, 32 Tx maximum) ・Highly flexible configurations ・Mix multiple protocols on the same board (ARINC 429, MIL-STD-1553, ARINC 708, ARINC 717, RS-232, RS-422, etc.) ・Based on IP Module mezzanine technology ・Support for LabVIEW
-
VME-1553
Abaco Systems （旧GE Intelligent Platforms） 1553/ARINC VMEbus 防衛 生産中止品(EOL)・Multi-function and single-function versions ・High-level API for Windows XP, 2000, Me, NT, 98, 95, VxWorks, Linux ・Multi-function Features: Simulataneous Bus Controller, 31 Remote Terminals or Bus Monitor ・1,2 or 4 Independent MIL-STD-1553 Channels
-
VME-5504L
Abaco Systems （旧GE Intelligent Platforms） キャリア拡張カード VMEbus 試験 環境・Supports up to 16 slave-only chassis per master ・DIN-type I/O connectors ・Double Eurocard form factor ・Link includes one master board, one slave board, and a wide variety of cable length options ・Supports 16-bit addressing ・Supports 8-, 16-, and 32-bit data transfers ・Supports the configuration of large I/O systems ・Supports up to 1,000-ft cables ・Differential line drivers and receivers provide ±7 V common-mode noise rejection ・Multidrop capability reduces cost ・Software transparent link ・Slave chassis is placed in reset if master chassis is powered down or cables are disconnected
-
VME-5531L
Abaco Systems （旧GE Intelligent Platforms） キャリア拡張カード VMEbus 試験 環境 生産中止品(EOL)・The VME-to-VME link consists of two boards and two fiber-optic cables (master board: 6U, slave board: 6U or 3U) ・Form, fit, and function replacement for VMIVME-5530 ・Maximum 6,560 ft (2,000 m) fiber-optic cables ・No EMI generated by cables ・High-voltage isolation ・High-noise immunity ・Small cables ・Advantages over standard repeaters ・Total electrical isolation between VMEbus systems ・Supports 16-, 24-, and 32-bit addressing (6U slave) ・Supports 8-, 16-bit data, 16-, 24-bit address (3U slave) ・Plug-and-play operation ・Supports 8-, 16-, and 32-bit data transfers (6U slave)
-
VME-5532L
Abaco Systems （旧GE Intelligent Platforms） キャリア拡張カード VMEbus 試験 環境 生産中止品(EOL)・No EMI generated by cables ・High-voltage isolation ・High-noise immunity ・Advantages over standard repeaters ・Small cables ・Maximum 6,560 ft (2,000 m) fiber-optic cables ・Total electrical isolation between VMEbus systems ・Supports 16-, 24-, and 32-bit addressing ・Software transparent allows direct communication from master chassis to slave chassis with no software overhead (unidirectional link control with bidirectional data transfers). This mode allows plug-and-play operation. ・Supports 8-, 16-, and 32-bit data transfers ・Register enable allows operation as described above, but includes registers in short I/O space dealing with slave chassis multimaster operation ・Supports a local master in slave chassis ・High-performance, easy-to-use method of linking two or more VMEbus systems together via fiber-optic cable
-
VME-REPEAT-A-L
Abaco Systems （旧GE Intelligent Platforms） キャリア拡張カード VMEbus 試験 環境 生産中止品(EOL)・DIN-type I/O connectors ・Double Eurocard form factor ・Supports up to 50-foot cables ・Allows expansion to 19 x 19 slots using 20-slot backplanes in a star configuration ・Supports VMEbus slaves on a slave-only VMEbus ・Supports all seven interrupt levels ・Propagation delay is approximately 150 ns ・Repeats VMEbus P1 and P2 ・Supports 8-, 16-, 32-bit transfers ・Supports 16-, 24-, and 32-bit addressing ・Links include one model REPEAT M, one model REPEAT S, and a variety of cable lengths
-
VME-5510L-xx
Abaco Systems （旧GE Intelligent Platforms） キャリア拡張カード VMEbus 試験 環境 生産中止品(EOL)・Software-controlled isolation ・Two boards and two cables (in a variety of cable lengths) form a VME-to-VME link ・Allows expansion to multiple VMEbus systems in a star configuration ・Switch-controlled isolation for maintenance ・Supports up to 25-ft cables ・Compliant to VMEbus Rev. C.1 ・Supports 8-, 16-, and 32-bit transfers (bidirectional) ・Supports 16-, 24-, and 32-bit addressing (bidirectional) ・Program-controlled interrupts allow each chassis to interrupt the other chassis ・In nontransparent mode, link arbiter determines which VME-5510 is master of the link ・Multimaster-allows multiple VMEbus masters in all chassis ・Software transparent mode-allows direct communication from primary chassis to secondary chassis with no software overhead (unidirectional link control with bidirectional data transfers)
-
VME-REPEATL
Abaco Systems （旧GE Intelligent Platforms） キャリア拡張カード VMEbus 試験 環境 生産中止品(EOL)・Links include one model REPEAT M, one model REPEAT S, and a variety of cable lengths ・DIN-type I/O connectors ・Allows expansion to 19 x 19 slots using 20-slot backplanes in a star configuration ・Supports up to 50-foot cables ・Supports 16-, 24-, and 32-bit addressing ・Repeats VMEbus P1 and P2 ・Propagation delay is approximately 150 ns ・Supports all seven interrupt levels ・Supports VMEbus slaves on a slave-only VMEbus ・Supports 8-, 16-, 32-bit transfers ・Double Eurocard form factor
-
VME-REPEATL-485
Abaco Systems （旧GE Intelligent Platforms） キャリア拡張カード VMEbus 試験 環境 生産中止品(EOL)・Supports VMEbus slaves on a "slave-only" VMEbus ・DIN-type I/O connectors ・Double Eurocard form factor ・Link includes one model REPEAT M-485, one model REPEAT S-485, and a wide variety of cable length options ・Supports 8- and 16-bit data transfers ・Supports 16- and 24-bit addressing ・Allows expansion to 19 x 19 slots using 20-slot backplanes in a star configuration ・Supports all seven interrupt levels ・Supports up to 2,000-foot cables ・Software transparent link ・Differential line drivers and receivers provide ±7 V noise rejection
