製品検索結果

・USB port or Ethernet network ・Computer with Pentium 800 MHz or higher processor; Pentium IV recommended ・256 MB RAM recommended (64 MB minimum supported; may limit performance) ・CD-ROM drive ・Super VGA (1024x768) or higher resolution is recommended ・Windows 2000 or Windows XP operating system. ・Minimum of 1 GB of free hard disk space

・Intel® Core 2 Duo Processor: 　　・1.5 GHz (ultra low voltage) 　　・4 MB L2 cache ・Up to 4 GB ECC DDR2 SDRAM ・2 GB onboard USB User Flash ・(2) PCIx 100-133 Mhz PMC sites ・(1) 4-lane PCIe XMC site ・ATI Radeon Graphics onboard w/8-lane PCI Express, Dual Display ・(2) Gigabit Ethernet Ports ・Additional I/O includes: 　　・(3) USB ports, (5) COM ports, (2) SATA ports, AC97 Audio, (2) SCSI ports, (8) GPIO lines, (2) PS/2 ports ・6U VME64x/VME320 interface ・Ruggedized, available as air-cooled and conduction-cooled ・Windows™ XPe, Wind River GPP Linux 2.6™, Solaris 10™, VxWorks® 6.x, or LynxOS® BSPs

・Processing 　　・Intel Core i7 　　・Dual core CPU 　　・2.53 GHz 　　・4MB L3 Cache 　　・SSE 4.2 floating point ・Intel GS57 chipset ・Optional VME 320 interface ・Memory 　　・Up to 8GB DDR3 SDRAM 　　・8GB NAND Flash ・Dual XMC/PMC sites ・External Peripherals 　　・(3) GbE 　　・(1) AC97 Stereo Audio 　　・(2) RS-232 　　・(3) RS-422 　　・(8) GPIO 　　・(4) USB 　　・(2) SATA 　　・(4) PCIe

・Powerful general-purpose single board computer with Freescale 8640/8641 PowerPC processor ・Dual e600 cores at 1.0GHz ・2 GB DDR2 SDRAM controlled by dual 64-bit controllers ・Full complement of I/O capability (Ethernet, SCSI, serial, USB 2.0, 1553, Serial ATA, TTL and differential discretes...,) including front panel Gigabit Ethernet connection ・Two 64-bit PMCs on independent PCI buses ・Single PCIe XMC site ・2eSST-capable VME interface ・Software 　　・Continuum Software Architecture (CSA) firmware providing a comprehensive suite of system debug, exerciser, and update functions, BIT, and non-volatile memory sanitization function 　　・CWCDS Wind River VxWorks 5.5.1 and 6.7 　　・CWCDS Wind River VxWorks 6.8 SMP 　　・CWCDS Wind River Linux 3.0 　　・CWCDS Continuum Vector Signal Processing Software 　　・INTEGRITY available from Green Hills Software 　　・LynxOS available from LynxWorks 　　・MILS 2.0 available from Wind River ・Designed for military harsh-environment applications, both air- and conduction-cooled ・Latest VME version of Curtiss-Wright's backwards compatible with 17x and 18x series of single board computers

・Powerful general-purpose single board computer with Freescale P4040/4080 Power Architecture processor ・Freescale QorIQ™ P4080 Communications Processor with eight Power Architecture™ processor cores, high-performance datapath acceleration logic, network and peripheral bus interfaces required for mil/aerospace applications 　　・8 E500MC cores at up to 1.5GHz ・4 or 8 E500MC Cores running up to 1.5Ghz ・Up to 4 GB DDR3 SDRAM with ECC controlled by dual 64-bit controllers ・Full complement of I/O capability (Gigabit Ethernet, SCSI, serial (RS232/422/485 async/sync), USB 2.0, 1553, Serial ATA, TTL and differential discretes...,) including front panel Gigabit Ethernet connection ・Two 64-bit PMCs on independent PCI buses ・Two x8 PCIe XMC sites ・2eSST-capable VME interface ・8GB of solder NAND flash for integrated mass storage capability ・Software 　　・Curtiss-Wright U-Boot firmware providing a comprehensive suite of system debug, exerciser, and update functions, BIT, and non-volatile memory sanitization function 　　・CWCDS Wind River VxWorks 6.x SMP 　　・CWCDS Wind River Linux 4.x 　　・INTEGRITY available from GreenHills Software ・Designed for embedded harsh-environment applications, both air- and conduction-cooled ・Latest VME version of Curtiss-Wright's backwards compatible 17x and 18x series of VME single board computers

・Dual IPv4/v6, Fully managed, intelligent multi-layer gigabit Ethernet switch with a 6U VME64 form factor. ・Up to twenty four 10/100/1000 Mbps non-blocking auto-negotiating ports operating at wire-speed ・Flexible port combinations (4 Gigabit Ethernet (front), 4 Fiber Optic (to front) or 4 Fast Ethernet (to rear) ・Dual Broadcom BCM5690 managed switch devices with a Motorola MPC8245 control and management processor ・64 Mbyte SDRAM with ECC, 4 Mbyte boot flash, 32 Mbyte configuration flash ・Out of band backplane management and debug port (10/100 Ethernet), JTAG support, and serial interface ・Fully integrated Layer 2 switching, Layer 3 routing, Quality of Service (QoS), IP multicast, security and network management ・Intuitive command line interface, web interface and SNMP interface for easy configuration and network management ・Air-cooled and conduction-cooled versions available

・Fully managed, intelligent multi-layer (layer2/3) gigabit Ethernet switch in a 6U VME form factor ・Complete range of convection and conduction cooled formats (IEEE 1101.1 and IEEE 1102.1) with shock and vibration support ・Up to 24 x 1GbE (10/100/1000 Mbps) auto-negotiating copper interfaces (4 of the ports can be optical) ・Up to 2 x 10GbE (10 Gbps) XAUI interfaces ・Transient voltage suppressors on each GbE port to protect from electrostatic discharge (ESD), cable discharge events (CDE), lightening and other induced voltage surges ・Wirespeed performance for all packet sizes at layer 2 or layer 3 including jumbo packets ・EIA232 out of band serial management and 10/100 debug port ・Ideal for architecting IPv4, IPv4/v6, or pure IPv6 transformational network architecture with support for intelligent routing ・Flexible network management, monitoring, and configuration capability via CLI, Telnet, Web, and SNMP interfaces ・Supports latest switching/routing features for layer 2 switching; layer 2 multicasting; VLANs; Spanning Tree (Rapid and Multiple); link aggregation; port mirroring; CoS/QoS features; layer 3 IPv4/v6 routing; tunneling; IP Multicasting ・Ubiquitous security including Secure Memory Erase; user authentication; port based security; protocol-based security; broadcast storm control; secure sockets layer (SSL); secure shell (SSH); stateless firewall capability; flexible Access Control Lists (ACLs); Network Address Translation (NAT) ・Extensive Built in Test (BIT) capability including Power up BIT, Initiated BIT and Continuous BIT

・Two x4 VXS links to backplane ・Dual 4Gbit/s Fibre Channel ports ・Dual XMC/PMC sites with x8 PCI Express® (PCIe) or independent 64-bit 133MHz PCI-X ・667MHz AMCC PowerPC™ 440SP processor ・512MB high-speed streaming memory ・Xilinx® Virtex®-5 SX95T (standard) or LX155T ・512MB DDR2 SDRAM (4 banks of 128MB) ・Air- or conduction-cooled rugged versions ・Board Support Package (BSP) for VxWorks®

・Intuitive, easy to use graphical tools providing visualization of multicore and multiprocessor systems ・Fully integrated tools minimizing time from development to deployment ・Maximizes performance through interactive monitoring ・Applications can be seamlessly scaled from one to many processor cores across multicore & multiprocessor systems ・Provides automatic code generation for AXISFlow configuration code and an application template ・Allows application bugs to be quickly identified and diagnosed ・Support across high performance architectures including PowerPC, INTEL and NVIDIA GPU multicore processors ・Provides graphical interface to Built-in-Test (BIT) software ・Support for Windows and Linux based host platforms

・Redundant transfer mode for extra error suppression ・Error detection ・Any node on the network can generate an interrupt in any other node on the network or in all network nodes with a single command ・One independent DMA channel ・128 Mbyte or 256 Mbyte SDRAM Reflective Memory ・Transfer rate 43 Mbyte/s (4 byte packets) to 170 Mbyte/s (64 byte packets) ・Dynamic packet size, 4 to 64 bytes of data ・Connection with multimode fiber up to 300m, single mode fiber up to 10km ・Up to 256 nodes ・Data written to memory in one node is also written to memory in all nodes on the network ・High speed, easy to use fiber-optic network (2.12 Gbaud serially) ・No processor overhead ・No processor involvement in the operation of the network ・PCI 64-bit 66 MHz transfers, 3.3 or 5V, universal add-in card