条件に該当する製品295件
-
PMC-601 MIL-STD-1553 PMC
Curtiss-Wright 1553/ARINC PMC/XMC 防衛 生産中止品(EOL)・Two independent MIL-STD-1553 interfaces ・Support for 1553A, 1553B Notice 2, and STANAG 3838 ・Device population options include: ・61588 mini-ACE with 4K word dual-port RAM ・61688 mini-ACE Plus with 64K word dual-port RAM ・custom options for MIL-STD-1553A-, MIL-STD-1760-, and McAir-compliant waveforms ・Both transformer-coupled and direct-coupled signals provided ・BC, RT, MT modes independently selectable for each channel ・16 bits of TTL-compatible discrete digital I/O ・Built-In-Test (BIT) firmware provided when integrated with Dy 4 processor cards ・VxWorks driver available supporting all modes of MIL-STD-1553 operation ・Green Hills INTEGRITY driver available, contact factory ・Linux driver available, contact factory ・PCI 2.1-compliant 32-bit, 33 MHz interface ・Needs only 5V from the basecard, no other voltages required ・Available in five ruggedization levels, level 0, 100, and 200 air-cooled, and level 100 and 200 conduction-cooled
-
PMC-429-CW ARINC Card
AIT 1553/ARINC PMC/XMC 防衛・Up to 32 ARINC429 Transmitter Channels concurrently ・Bit transmission rates and duty cycles are selectable for each channel and the 12.5 kbits/sec and 100 kbits/sec transmit modes are supported ・Rate Oriented, Block, and Acyclic Label Transmission modes support all simulation needs ・Error injection for each Label Transfer: short gap, parity, bit count, coding ・Programmable gaps between Labels ・Up to 32 ARINC429 Receiver Channels concurrently ・Label/SDI selective receive, sequential receive modes ・Multi-buffering with real-time data buffer updates ・Triggering and filtering ・Upper and lower limit check ・Trigger on specific or any error ・Label content and sequential dependent trigger ・Label selective and label data contents dependent filter ・Label selective and label data contents dependent interrupts ・Programmable gaps between Labels ・VxWorks, Linux and Windows 2000 driver available directly from AIT (Avionics Interface Technologies) ・PCI 2.1-compliant 64-bit, 66 MHz interface ・Needs only 5V from the basecard, no other voltages required ・Available in ruggedization levels, level 0 and 200 conduction-cooled ・Product Support provided by AIT (Avionics Interface Technologies)
-
NIC10GBT
Abaco Systems （旧GE Intelligent Platforms） Ethernet PMC/XMC 通信・ キャリア・Two 10GBase-T ports ・Rear I/O ・XMC form factor ・Conduction Cooled ・Supports Jumbo Frames up to 15.5 KB ・Integrated IPsec and MAC sec Security Engines ・Auto-negotiate between 100Mbits, 1Gbps and 10Gbps speeds ・128 Transmit and Receive Queues (per port) ・64-bit address support ・TCP/UDP/IP checksum offload, TCP segmentation offload ・IEEE 1588 Precision Time Protocol support ・PCI Express v2.1 with 5.0 GT/s and 2.5 GT/s support for x1, x2, x4 and x8 link widths ・Support Windows, Linux and VxWorks ・RoHS compliant ・802.1Q VLAN support ・Mezzio module with two RJ45 connectors ・Supports Category 6 and 6A Cable via optional mezzio ・Ethernet ports mapped to X12d or X8d per VITA 46.9 ・VITA 42.0 (XMC) ・XMC Connector P15 VITA 42.3-8 Lane PCIe ・XMC Connector P16 VITA 42.9 pattern mapping ・Complies with ANSI/VITA 20-2001 (CC PMC), IEEE 1386 (CMC), IEEE 1386.1 (PMC)
-
NIC10G
Abaco Systems （旧GE Intelligent Platforms） Ethernet PMC/XMC 通信・ キャリア・Two 10GbE ports ・Front or Rear I/O ・XMC form factor ・Intel 82599ES Dual 10GbE Controller ・Supports Jumbo Frames ・128 Transmit Queues ・64-bit address support ・Dual SFP+ ports on front panel supporting 10GBase-SR, 10GBase-LR, 10GSFP+Cu Bi-color LED for 10Gb/s Link status and Activity per port ・Eight lanes PCI Express (Gen2) ・Support for Data Center Bridging (DCB) (802.1Qaz, 802.1Qbb, 802.1p) ・Rear I/O supports CX4 and KX4 ・802.1q VLAN support ・Support for Windows, Linux and VxWorks ・RoHS compliant ・Option for PXE Boot
-
FX400 Fibre Channel PMC
Curtiss-Wright 通信I/O PMC/XMC 防衛 生産中止品(EOL)・Performance of two HBAs on a single HBA form factor ・PCI, PCIe and PMC form factors ・Dedicated RISC Engine for each FC function ・PCI-to-FC ASIC with two independent FC functions ・Requirement of only one system slot ・Two independent 4.25 Gbps channels (up to 800 MBps per channel, full duplex) ・Auto-Speed Negotiation used to detect 1.0625, 2.125, and 4.25 Gbps ・Status LEDs that indicate current condition of each channel ・Availability for standard commercial, military, rugged and conduction cooled fibre channel applications. ・FC physical media interface that is SFP transceivers ・Mechanical interface to stiffener rib, located on PMC-compliant carriers to ensure robust mechanical performance
-
ART500A(ATCA Rear Transition Module (RTM) for ATC500)
VadaTech Ethernet AdvancedTCA 通信・ キャリアAdvancedTCA RTM for ATC500 •Quad 100GbE •Dual PCIE x8 •GbE and RS-232 for management
-
ART998(ATCA Rear Transition Module (RTM)
VadaTech Ethernet AdvancedTCA 通信・ キャリアATCA RTM for VadaTech ATC998 •Eight RJ-45 for GbE •RoHS compliant
-
ART128A(ATCA Rear Transition Module (RTM) for ATC128)
VadaTech Ethernet AdvancedTCA 通信・ キャリアAdvancedTCA RTM for ATC128 •Quad 10GbE •Dual 40GbE •RS-232 for management
-
ART001(ATCA I/O Rear Transition Module (RTM)
VadaTech Ethernet AdvancedTCA 通信・ キャリアATCA RTM •5x RJ-45 ports for GbE •RJ-45 port for 10/100 Ethernet •6x SFP ports for GbE
-
ATC998(ATCA Ethernet Pass-through Front Board)
VadaTech Ethernet AdvancedTCA 通信・ キャリアEthernet Pass-through front board •Eight RJ-45 for front panel access •Ethernet signals routed to Zone 3 connector •Designed to mate with ART998 (RTM)
