条件に該当する製品2376件
-
16AO2MFS(16-bit Analog Multifrequency Analog Output (2 Channels))
GneralStandardsCorporation D/A PMC/XMC 試験 環境The PMC-16AO2MFS D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Two analog output channels are updated independently from an internal buffer, either at software-determined rates, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ±10V, ±5V or ±2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.
-
16AO16MI( 16-Channel, 16-Bit, 200KSPS, Isolated Analog Output Module With 16 Mutually Isolated Analog Output Channels)
GneralStandardsCorporation D/A PMC/XMC 防衛16 Mutually Isolated 16-Bit simultaneously-clocked analog output channels. Output clocking rates from zero to 200 kHz per second per channel. ±10V or Zero to +10V output ranges at ±10mA, or 600-Ohm load at 12V. Output Configuration: Floating, 2-wire. Output impedance: 2 Ohms maximum. Overvotage-protected to ±30V. Sustains shorts to channel-ground indefinitely. Isolation; Channel-to-Channel: Sustained 1000VRMS. Isolation; Channel-to-Bus: Sustained 1000VRMS. Accuracy: ±0.04% of fullscale. Calibration: On-demand internal offset and gain autocalibration of all channels. cPCI 6U form factor. Conformal coating ensures long-term insulation integrity. 256 K-Sample FIFO output data buffer. Front-panel system I/O connections (Rear-Panel version available), 66MHz 64-bit PCI support, with universal 5V/3.3V signaling and DMA support. PCI burst rates to 400MB/sec.
-
16AISS8AO8MI (16-Channel, 16-Bit, 200KSPS, Isolated Analog Input/Output Module With 16 Mutually Isolated Analog Input and Output Channels)
GneralStandardsCorporation アナログI/O PMC/XMC 物理 天体Input sample rates from zero to 200 Kilosamples per second per channel. ±10V, ±1V, ±100mV or ±10mV input ranges, software-selectable. Input Configuration: Differential or floating. Input impedance: 10 Megohms. Common Mode Voltage: Equal to or greater than ±200V, Channel-to-Bus. Antialiasing Filter; 5th order Chebyshev; Factory-configured from 5kHz to 100kHz. 50Hz rejection filter; 30dB. Common Mode Rejection: 120dB minimum on all ranges.
-
16AIF16MIWR(16-Channel, 16-Bit, 200KSPS, Isolated Analog Input Module With 16 Mutually Isolated Wide-range Analog Input Channels)
GneralStandardsCorporation A/D 防衛16 Mutually Isolated 16-Bit simultaneously-sampled analog input channels. Input sample rates from zero to 200 Kilosamples per second per channel. ±10V, ±1V, ±100mV or ±10mV input ranges; software-selectable. Input Configuration: Differential or floating. Input impedance: 10 Megohms. Isolation; Channel-to-Channel: Sustained 1000VRMS Isolation; Channel-to-Bus: Sustained 1000VRMS Common Mode Voltage: Equal to or greater than ±200V, Channel-to-Bus. Antialiasing Filter; 5th order Chebyshev; Factory-configured from 5kHz to 100kHz. Common Mode Rejection: 120dB minimum on all ranges. Accuracy: ±0.04% of fullscale. Calibration: On-demand internal offset and gain autocalibration of all channels. 50Hz rejection filter; 30dB. cPCI 6U form factor. Conformal coating ensures long-term insulation integrity. Front-Panel system I/O connections (Rear-Panel version available), 66MHz 64-bit PCI support, with universal 5V/3.3V signaling and DMA support. PCI burst rates to 400MB/sec.
-
OPTO32A(Optically-Isolated I/ O with Change-of-State Interrupts)
GneralStandardsCorporation デジタルI/O PMC/XMC 通信・ キャリアThe PMC-OPTO32A board has 32 optically-coupled digital I/O channels consisting of 8 outputs and 24 inputs. Each channel is electrically isolated (1000 Volts) from the host processor board. Change-of-State Interrupts allow for an interrupt to the PMC host to be generated from any level change on any input. Built-in-self-test, selectable debounce times, input pulse counter, and I/O voltages to 50 Volts makes for a versatile digital interface board.
-
OPTO32B
GneralStandardsCorporation デジタルI/O PCI 通信・ キャリアThe PCI-OPTO32B board has 32 optically-coupled digital I/O channels consisting of 8 outputs and 24 inputs. Each channel is electrically isolated (1000 Volts) from the PMC host processor board. Change-of-State Interrupts allow for an interrupt to the PCI host to be generated from any level change on any input. Built-in-self-test, selectable debounce times, input pulse counter, and I/ O voltages to 50 Volts makes for a versatile digital interface board.
-
DMI32(Very High-speed Parallel Digital Input/Output Board Up to 200 Mbytes/s Cable I/O)
GneralStandardsCorporation デジタルI/O PCI Express 試験 環境The PCI-DMI32 board provides for data I/O via the cable at up to 200 Mbytes per second (LVDS differential I/O) and can transfer data indefinitely without host intervention. The data path is up to 32 bits wide. The board will interface to a wide variety of digital I/O devices and will operate back-to-back with a second board to provide a high-speed PCI-to-PCI Interface. Bi-directional handshake signals can be user defined and programmed by the factory to accommodate almost any handshaking protocol (Contact factory).
-
AMC703（Processor AMC Based On QorIQ T4241, PCIe）
VadaTech PowerPC (FreeScale) AdvancedMC 防衛Processor AMC with QorIQ T4241 Single-module, mid-size per AMC.0 Three banks of 64-bit DDR3 memory (up to 24 GB total) Front panel has 10GbE via SFP+ and GbE via RJ-45
-
AMC708（LS1046A Processor AMC, PCIe）
VadaTech ARM AdvancedMC 鉄道/交通PrAMC with NXP Layerscape LS1046A (A72 Core) Front Panel 10GbE via SFP+ 8 GB DDR4 with ECC PCIe Gen3 on Ports 4-7 or 8-11 per AMC.2
-
AMC709（LS1046A Processor AMC, 10GbE）
VadaTech ARM AdvancedMC 鉄道/交通PrAMC with NXP Layerscape LS1046A (A72 Core) 8 GB DDR4 with ECC 10GbE on Ports 4-7 and 8-11 per AMC.2 Dual GbE per AMC.2 on Ports 0-1
