製品検索結果

・Five ruggedization levels, air- and conduction-cooled ・6U VME SBC ・Two independent processor nodes ・2x Freescale Power Architecture 7448 @ 1.4 GHz ・2x PMC slots ・For Ruggedization Levels, please see the configuration guide under the downloads tab ・P0P2X600 Rear Transition Module

16 Precision 3-Wire Balanced Differential High-Speed Analog Output Channels 16-Bit Resolution; D/A Converter per Channel Dual Selectable 8th-Order Reconstruction Filters on All Outputs 66MHz PCI Bus Support Data Rates to 450K Samples per Second per Channel; 7.2 MSPS Aggregate Rate Software-Selectable Output Ranges of ±10V or ±5V Full Scale at 5mA with High-Level Option, or ±2.5V or ±1.5V at 30mA with High-Current Option Supports 50-Ohms Loads on ±1.5V Output Range Optional 2-Wire Single-Ended Analog Outputs 256K-Sample Output Data FIFO Buffer; Configurable as Open or Circular Simultaneous or Sequential Output Clocking Multiboard Synchronization Compatibility with Other GSC I/O Products Continuous and Burst (One-Shot) Output Modes Support Seamless Waveform Sequencing Data Rate Controlled Internally or Externally Software-Selectable Differential Clock I/O for Synchronizing Sigma-Delta A/D Boards High Accuracy Ensured by On-Demand Autocalibration of all Channels Remote Ground Sensing

16 Precision 3-Wire Balanced Differential High-Speed Analog Output Channels 16-Bit Resolution; D/A Converter per Channel 66MHz PCI Bus Support Data Rates to 440K Samples per Second per Channel; 7.04 MSPS Aggregate Rate Software-Selectable Output Ranges of ±10V, ±5V, ±2.5V or ±1.25V Optional 2-Wire Single-Ended Analog Outputs 256K-Sample Output Data FIFO Buffer; Configurable as Open or Circular Simultaneous or Sequential Output Clocking Multiboard Synchronization Supported Continuous and Burst (One-Shot) Output Modes Support Seamless Waveform Sequencing Data Rate Controlled Internally or Externally, Real-Time Rate Adjustment Supported Software-Selectable Differential Clock I/O for Synchronizing Sigma-Delta A/D Boards High Accuracy Ensured by On-Demand Autocalibration of all Channels Remote Ground Sensing Available on Adapters for Alternate Form Factors: PCI, cPCI, PC104-Plus

Precision 16-Bit analog outputs: DAC per Channel Software-selectable output ranges of ±10V, ±5V, 0 to +10V, or 0 to +5V. Output clocking rates to 500K samples per second per channel with all channels active 66MHz PCI Bus support with Block-mode and Demand-mode DMA transactions 256K-Sample output data FIFO buffer; Configurable as open or closed (circular) Simultaneous or sequential output clocking Settling to 0.01 percent in 4us Multiboard synchronization supported Continuous and Triggered-Burst output modes support seamless waveform sequencing Data clocking rate controlled internally or externally High accuracy ensured by on-demand Autocalibration of all channels, with outputs forced to zero during autocalibration. Available on adapters for alternate form factors, including PCI, cPCI and PC104-Plus, as well as PCI-Express, PCIX and cPCIX

8 Single-ended or 3-Wire Differential 18-Bit Analog Output Channels Simultaneous Clocking; Individual R-2R 18-Bit DAC per output channel DC to 500KSPS Sample Rate per Channel; 0-4 MSPS aggregate rate Output ranges: ±10V, ±5V, ±2.5V Independent 256K-sample output FIFO Buffer 8 Bidirectional Digital I/O lines; TTL compatible Internal Sample Rate Generator with 24-Bit rate divider Hardware Sync and Clock I/O for Multiboard Synchronization; Front-panel and Internal access Conforms to PCl Bus Specification, Revision 2.3, 66/33 MHz with Universal Signaling Standard Single-width PMC Form factor DMA Engine Supports Block-Mode Transfers in Two Channels On-demand Autocalibration Integrated DC/DC Conversion and Dual Regulation for Internal Supply Voltages

16 Single-ended or 3-Wire differential 20-Bit analog output channels. Simultaneous Clocking; Individual R-2R 20-Bit DAC per output channel. Clocking rates from zero to 500KSPS Output ranges: +⁄-10V, +⁄-5V, +⁄-2.5V, software-selectable. 8th-Order reconstruction filter at each output. 256K-sample output FIFO buffer. Internal sample rate generator with 24-Bit rate divider. Hardware trigger and clock I/O for multiboard synchronization; Front-panel and Internal access. 8 Bidirectional digital TTL I/O lines. Conforms to PCl Bus Specification, Revision 2.3, 66/33 MHz 64-Bits, with Universal Signaling. PCI burst rates to 400MB/sec. Standard cPCI-6U form factor. (Call for availability in PCI and PCI-Express form factors). DMA Engine supports block-mode and demand-mode transfers in two DMA channels. On-demand offset and gain autocalibration of all channels. Software-controlled master-clock frequency fine-adjustment. Front-Panel system I/O connector.

Eight Single-ended or 3-Wire Differential 20-Bit analog output channels. Simultaneous Clocking; Individual R-2R 20-Bit DAC per output channel. Clocking rates from zero to 500KSPS. Software-selectable fullscale output ranges: ±10V and ±5V; Optionally ±5V and ±2.5V. 256K-sample output FIFO buffer. Low Glitch Impulse; Typically 3.8nV-Sec on ±5V range. Low-Noise DACs and output sections produce 95dB SNR. Clocking from either external or internal sample rate generator. Hardware trigger and clock I/O for multiboard synchronization; Selectable as LVDS or TTL. 8 Bidirectional TTL Digital I/O lines. PCI Express version conforms to PCI Express Specification revision 1.0a for short cards Optional Outputs Disconnect feature supports multiple card redundancy, and ensures quiet outputs during autocalibration and selftest operations. Same pinout as that used for the PCIe-18AO8, with similar software interface. Available also in 16-Channel configuration in full-length format, as well as in PMC and PCI formats DMA Engine supports block-mode and demand-mode transfers. Remote ground sensing to minimize single-ended errors. On-demand autocalibration of all channels.

32 Single-Ended or 16 Differential Analog Input Channels 16-Bit High-Speed Scanning ADC Scanning Rates to 350K Channels per Second (500KSPS Sampling Rate in Single-Channel Mode) 1024-Point Scan List Controls Channel Sequence and Range 32K-Sample FIFO Buffer Optional 16 Current Inputs; 4-20ma, 0-20ma 4 Analog Output Channels 16-Bit Dac per channel 400 KSPS Clocking Rate per Channel Open and Circular Buffer Operation 32K-Sample FIFO Buffer Software-Selected Analog Ranges: �2.5V, �5V, �10V, 0-5V, 0-10V 8-Bit Bidirectional Digital I/O Port 512 Byte FIFO I/O Buffer Supports Pattern Generation 66 MHz PCI Support

16 Single-Ended or 8 Differential Analog Input Channels 16-Bit High-Speed Scanning ADC Scanning Rates to 350K Channels per Second (500KSPS Sampling Rate in Single-Channel Mode) 1024-Point Scan List Controls Channel Sequence and Range 32K-Sample FIFO Buffer Optional 8 Current Inputs; 4-20ma, 0-20ma 4 Analog Output Channels 16-Bit Dac per channel 400 KSPS Clocking Rate per Channel Open and Circular Buffer Operation 32K-Sample FIFO Buffer Optional 4-20ma Current Outputs and Internal Loop Supply Software-Selected Analog Ranges: �2.5V, �5V, �10V, 0-5V, 0-10V 8-Bit Bidirectional Digital I/O Port 512 Byte FIFO I/O Buffer Supports Pattern Generation 66 MHz PCI Support

16 Single-Ended or 8 Differential Analog Input Channels 16-Bit High-Speed Scanning ADC Scanning Rates to 350K Channels per Second (500KSPS Sampling Rate in Single-Channel Mode) 1024-Point Scan List Controls Channel Sequence and Range 32K-Sample FIFO Buffer Optional 8 Current Inputs; 4-20ma, 0-20ma 4 Analog Output Channels 16-Bit Dac per channel 400 KSPS Clocking Rate per Channel Open and Circular Buffer Operation 32K-Sample FIFO Buffer Optional 4-20ma Current Outputs and Internal Loop Supply Software-Selected Analog Ranges: �2.5V, �5V, �10V, 0-5V, 0-10V 8-Bit Bidirectional Digital I/O Port 512 Byte FIFO I/O Buffer Supports Pattern Generation 66 MHz PCI Support